Printer Image

More Horsepower for Your Camaro: K&N® Introduces Air Intake System #63-3105 for 2016-2017 Camaros

Engineered for 2016-2017 Chevrolet Camaro 2.0L models, the K&N® 63-3105 air intake system offers a guaranteed increase in horsepower and torque for your Chevy Camaro—giving you a boost in power and protection, with typical installation in 90 minutes or less.

The standard 2017 Camaro with a turbocharged 2.0-liter four-cylinder engine offers 275 horsepower and 295 pound-feet of torque, and is paired with an eight-speed automatic transmission. The new generation of Camaros—from 2016 onward—is praised by reviewers for responsive steering, exceptional handling, and competitive fuel economy.


The 63-3105 air intake system

The 63-3105 features a High-Flow Air Filter and steel heat shield

Naturally, you want as much horsepower as possible for your Camaro—which is where K&N’s dedication to exceptional engineering and outstanding performance comes in to play. The 63-3105 air intake system helps decrease air turbulence through the removal of the stock intake components that may slow the volume of air reaching your engine. Many factory intake systems have baffles and other airflow-obstructing elements, and by replacing the full stock system with a more aerodynamic design, the engine receives a greater volume of airflow—giving you an increase in performance.


The 2017 Chevrolet Camaro 2.0L L4

The 2017 Chevrolet Camaro 2.0L L4

The K&N® 63-3105 is a free-flowing, high-density polyethylene cold air intake system designed to replace the factory air filter and air intake components. A high-density polyethylene (HDPE) rotationally molded tube accelerates airflow to your engine and reduces turbulence—offering a guaranteed increase in horsepower and torque. Paired with a state-of-the-art washable, reusable High-Flow Air Filter™ designed to capture contaminants and provide exceptional engine protection, you can bid farewell to wasteful disposable filters—this intake system is designed to last for the life of your vehicle!


The 2017 Chevrolet Camaro 2.0L L4

K&N air intake systems come with a 10-Year/Million Mile Limited Warranty

The oversized, conical filter shape allows for up to 100,000 miles between cleanings (under normal highway driving conditions). When it does need to be cleaned, you can use the K&N Recharger® Kit (99-5000 or 99-5050) to quickly and easily restore your filter’s performance. A state-of-the-art design of oiled, layered cotton media provides outstanding contaminant capture—and up to 50% more airflow over a disposable filter. Each intake and filter is designed to last for the life of your vehicle.


The 63-3105 air intake system after installation

The 63-3105 air intake system after installation

The 63-3105 system also features a custom powder-coated steel heat shield which protects the air filter and intake air from high engine temperatures. The heat shield installs onto the lower factory air box and retains the fresh air inlet. The air intake tube funnels airflow directly into the engine’s throttle body, offering a guaranteed increase in horsepower and torque.


Since the kit utilizes existing factory mounting points, requires only basic hand tools, and incorporates the factory mass air sensor, installation can typically be completed in 90 minutes or less.


This intake system comes with a 10-Year/Million Mile Limited Warranty. Furthermore, using a K&N replacement air intake system will not void your factory warranty; in the U.S., manufacturers must provide evidence that an aftermarket part is the cause of a necessary repair in order to void or deny warranty coverage. The Consumer Products Warranty Act of 1975 (also known as the Magnuson-Moss Warranty Act) protects consumers’ rights to their warranty coverage.


You are guaranteed to experience an increase in horsepower and torque with your new K&N air intake system. On a chassis dynamometer, a 2016 Chevrolet Camaro 2.0L with the stock air intake was recorded at 229.04-hp at 4,903rpm, and after installation of the 63-3105 the same vehicle was recorded at 235.61-hp at 4,903rpm—an estimated increase of 6.57-hp. The torque was also improved from 250.53 lb-ft on the stock air intake to 255.63 lb-ft with the 63-3105 —a total estimated increase in torque of 5.1 lb-ft at 3,991rpm. You can buy with confidence under the 10-Year/Million Mile Limited Warranty, and the assurance that you’re receiving a top-quality, extensively tested product.

The 63-3105 is designed for use in the following vehicles:

• 2017 Chevrolet Camaro 2.0L L4 Fuel Injection—All Models

• 2016 Chevrolet Camaro 2.0L L4 Fuel Injection—All Models


Will using a K&N® replacement air intake system void my factory warranty?

No. In the United States, in order for the manufacturer of a warranted product to void or deny warranty coverage of a repair due to the use of an aftermarket part, the manufacturer must provide proof that the aftermarket part is the cause of the necessary repair. These rights are protected under the Consumer Products Warranty Act of 1975 (also referred to as the Magnuson-Moss Warranty Act).

Are K&N® performance air intake systems or RK-series custom air cleaner assemblies emissions legal in the U.S.?

Performance intake systems are legal for street use in most areas of the United States.

In California, and in specific regions which have adopted California air quality regulations, only CARB-exempt performance intakes are legal for street use.

Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

Can a K&N® product cause my Check Engine Light or Service Light to come on?

It is possible that the Check Engine Light may come on after installing a K&N air filter or performance intake system. This does not necessarily mean that there is something wrong with your air filter or intake; sometimes, the higher air flow and lower restriction provided by the K&N product will uncover an existing mechanical or electronic issue with your vehicle. In rare cases, you may have a K&N product which was manufactured outside of its design tolerances, causing sensors in your vehicle to read data outside of their normal expected values. In either case, the K&N Warranty Department can work with you to narrow down the cause of the Check Engine Light and correct the issue.

How much horsepower does a K&N® cold air intake add?

Dynamometer tests indicating horsepower and torque increases over the OEM intake system will appear on the "Product Details" page for each of our performance intake systems.

What does a cold air intake do for a car?

Cold air intakes allow for increased airflow to your engine, which results in an increase in torque and acceleration for your vehicle.

Can cold air intakes improve gas mileage?

In theory, a cold air intake could increase the gas mileage of your vehicle due to improved airflow which allows the engine to run more efficiently and require less fuel. However, K&N does not make any guarantees in terms of increased gas mileage with the use of our filters or intakes.

*Some intake systems are not legal for sale or use on any pollution controlled motor vehicle in California or states adopting California emission procedures. See for CARB status on each part for a specific vehicle.
K&N Blog Home