2008 through 2013 Polaris Ranger RZR Owners Gain Estimated 3.40 HP with K&N Air Intake Kit

Polaris blew the lid off the side-by-side ATV market with the new Polaris Ranger RZR. It is well engineered, only 50 inches wide and the only true trail capable side-by-side in its class. It weighs in around 945 pounds and has the lowest cage height of any side-by-side in the industry.

K&N's 63-1120 performance intake system for 2008 to 2012 Polaris Ranger RZR 800
K&N's 63-1120 performance intake system for 2008 to 2012 Polaris Ranger RZR 800

2008 Polars Ranger RZR 800 with new K&N performance air intake system
2008 Polars Ranger RZR 800 with new K&N performance air intake system
K&N Engineering has designed a new performance air intake system (63-1120) for the 2008 through 2013 Polaris Ranger RZR 800, 2009 through 2013 Polaris Ranger RZR S 800 and 2011 Polaris Ranger RZR 4 800 EPS Robby Gordon Edition. Dyno testing shows an estimated 3.40 horsepower increase at 25.6 mph.
2008 Polaris Ranger RZR 800 gets an addtional boost in horsepower with K&N performance intake kit
2008 Polaris Ranger RZR 800 gets an addtional boost in horsepower with K&N performance intake kit


Dyno chart for 2008 Polaris Ranger RZR 800
Dyno chart for 2008 Polaris Ranger RZR 800

The 63-1120 replaces the stock airbox and intake track. An oversized K&N X-Stream Top air filter is included to increase airflow along with dirt and dust capacity. K&N’s unique pleated design provides a larger surface area and an increased volume of air flow over the stock unit. This results in better throttle response, additional horsepower and longer service intervals.

The airbox is made of black powder-coated steel to protect the K&N X-Stream Top Air Filter from pulling in engine heated air. A separate crankcase breather filter vents heat and oil vapor generated from engine crank pressure. A K&N DryCharger is supplied for extreme dust or wet conditions.

For optimum performance, fuel management modifications are not necessary. K&N high-flow air filters are washable and reusable. They allow high air flow while providing excellent filtration. Most K&N air intakes can be installed in 90 minutes or less.

The K&N 63-1120 air intake fits the following Polaris models:
2013 POLARIS RANGER RZR S 800 EPS LE 760
2013 POLARIS RANGER RZR 800 S LE 760
2013 POLARIS RANGER RZR 800 S 760
2013 POLARIS RANGER RZR 800 LE 760
2013 POLARIS RANGER RZR 800 EPS LE 760
2013 POLARIS RANGER RZR 800 760
2012 POLARIS RANGER RZR S MILITARY 760
2012 POLARIS RANGER RZR S 800 EPS LE 760
2012 POLARIS RANGER RZR 800 S LE 760
2012 POLARIS RANGER RZR 800 S 760
2012 POLARIS RANGER RZR 800 LE 760
2012 POLARIS RANGER RZR 800 760
2011 POLARIS RANGER RZR S 760
2011 POLARIS RANGER RZR 800 SW MILITARY 760
2011 POLARIS RANGER RZR 800 760
2011 POLARIS RANGER RZR 4 ROBBY GORDON EDITION 760
2011 POLARIS RANGER RZR 4 800 GORDON EDITION 760
2011 POLARIS RANGER RZR 4 800 EPS ROBBY GORDON EDITION 760
2011 POLARIS RANGER RZR 4 800 760
2010 POLARIS RANGER RZR S 760
2010 POLARIS RANGER RZR 800 760
2010 POLARIS RANGER RZR 4 800 GORDON EDITION 760
2010 POLARIS RANGER RZR 4 800 760
2009 POLARIS RANGER RZR S 760
2009 POLARIS RANGER RZR 800 760
2008 POLARIS RANGER RZR 800 760

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.