K&N adds Horsepower to 2013 to 2016 Scion FR-S, Subaru BRZ and Toyota GT86 Models

K&N Air Intake under the hood of the Scion FR-S 2.0L
K&N Air Intake under the hood of the Scion FR-S 2.0L
Dyno Chart for K&N 2013 SCION FR-S 2.0L Air Intake 69-8619TS
Dyno Chart for K&N 2013 SCION FR-S 2.0L Air Intake 69-8619TS
2013 Scion FR-S, Subaru BRZ and Toyota GT86 models with 2.0 liter engines are stand out in a crowd and make people stop and take a look. All three of these vehicles are a true magnet for the tuners out there as a great performance starting base. The FR-S, BRZ and GT86 come with a 2.0 liter boxer engine that puts out an estimated 200 horsepower at 7400 RPM. Combining the sleek look, great performance and tuner appeal, all being offered by three different automotive manufactures, you end up with one killer combination with a lot of options.
K&N Air Intake System for Scion FR-S, Subaru BRZ and Toyota GT86 2.0L
K&N Air Intake System for Scion FR-S, Subaru BRZ and Toyota GT86 2.0L


To help add even more performance and customization, K&N offers the 69-8619TS air intake system. The K&N 69-8619TS air intake system added an estimated gain of 6.6 horsepower at 6670 RPM and 5.5 feet pound of torque at 5670 RPM to a 2013 Scion FR-S with 2.0 liter engine. This air intake is simple to install and it is a great way to add simple power with great under the hood looks.


This air intake is covered by K&N's Million Mile Limited Warranty, and you end up with one performance upgrade that you cannot resist. The 69-8619TS air intake system comes with all of the necessary components for an easy installation. Just follow the simple step by step installation instructions, and it should take no more than 90 minutes to bolt in. The 69-8619TS air intake system's main components include K&N's high performance air filter, a vehicle specific heat shield and mandrel bent aluminum air intake tube. The K&N air filter is designed to go up to 100,000 miles, depending on driving conditions, before it needs to be serviced using K&N's 99-5000 air filter cleaner kit.

The heat shield was enginered for this engine bay setup and will bolt directly in place of the stock air filter housing. The purpose of the heat shield is to help keep the warm under hood temperatures from reaching the filter, keeping the air that goes into the engine nice and cold. The air intake tube that comes with this air intake system has a welded on, mass air sensor specific, adapter and also includes a threaded fitting for the crank case vent hose. The tube was engineered to work with the stock sensor and computer setup and programing, so no reprograming of the vehicle's computer is needed. Besides the main components, the 69-8619TS air intake system also includes all of the hardware, hose clamps, hoses and fittings needed for installation. All you will need is a few simple tools and about 90 minutes of time to have this air intake system installed.
Scion FR-S with K&N Air Intake Installed
Scion FR-S with K&N Air Intake Installed


See all K&N air intakes for Scion FR-S, Subaru BRZ and Toyota GT86 models using the Scion FR-S air intake or Subaru BRZ air intake pages on KNFilters.com. Find K&N products for and vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.

K&N 69-8619TS air intake fits the following:

2016 SUBARU BRZ 2.0L H4
2016 SCION FR-S 2.0L H4
2015 SUBARU BRZ 2.0L H4
2015 SCION FR-S 2.0L H4
2014 SUBARU BRZ 2.0L H4
2014 SCION FR-S 2.0L H4
2013 SUBARU BRZ 2.0L H4
2013 SCION FR-S 2.0L H4