Your Ford F150’s New Best Friend: An Enclosed Intake from K&N

K&N enclosed air box intake for Ford F150 V8: 63-2610

Designed in K&N’s development center and laboratory using the most advanced computer-aided design and 3D modeling, the K&N® 63-2610 cold air intake system is engineered specifically for most 2015-2019 Ford F150 V8 5.0L models, and includes a larger than stock fresh air scoop behind the front grille to increase airflow to the high-performance enclosed air box filter assembly. If you have an F150, this is one performance upgrade that might be hard to pass up.

ADVANCED FILTER PROTECTION FOR YOUR FORD F150 V8

This brand-new intake has been meticulously designed to provide some of the best filter protection from heat on the market. Colder air to your intake helps provide more power—and the removal of excess stock baffles helps give a satisfying engine growl on acceleration that returns to quiet once at speed.

Specifications:

- Guaranteed to increase horsepower and torque

- Enclosed air box helps protect the filter from heat in the engine bay

- Roto-molded HDPE intake tube paired with oversized oiled cotton air filter and fresh air scoop

- Engineered to provide high airflow and exceptional filtration

- Filter only requires cleaning every 100,000 miles under normal highway driving conditions

- Typical installation can be completed in 60 minutes or less with simple hand tools

- 10-Year/Million Mile Limited Warranty™

- Will not void vehicle warranty

Choose a K&N cold air intake for increased HP and torque for F150s

This helps my engine push out tons of power, much more than the stock intake gave me. – Brian from Colorado [Part #63-9034]

MORE HORSEPOWER IN LESS THAN 60 MINUTES*

K&N® performance air intake are guaranteed to increase horsepower. During dynamometer testing, the 63-2610 provided an estimated power increase of 15.4-horsepower and 23.2 lb./ft. of torque**.

More horsepower guaranteed for your F150

Easy to install. Sounds awesome and has a lot of power. – Jason from Florida [Part #63-9036]

INSTALL AT HOME IN LESS THAN AN HOUR

INCLUDES STEP-BY-STEP INSTRUCTIONS

Even if you aren’t a seasoned mechanic, you can still install your new intake in your home garage. The K&N® 63-2610 system is engineered to incorporate factory mounting points and the factory mass air sensor. Installation can typically be completed in 60 minutes or less, and requires only simple hand tools.

 

Detailed, step-by-step instructions are included in your kit, and installation instructional videos are available on our website and YouTube channel for many applications. View the product page for the most up-to-date vehicle compatibility information.

The 63-2610 is engineered to fit:

  • 2019 Ford F150 5.0L V8 Gas
  • 2018 Ford F150 5.0L V8 Gas
  • 2017 Ford F150 5.0L V8 Gas
  • 2016 Ford F150 5.0L V8 Gas
  • 2015 Ford F150 5.0L V8 Gas
Installed K&N cold air intake for Ford F150 V8

Great intake as always. I've had three different vehicles with K&N cold air intakes and they do a great job of fitting it in the engine bay. I like the performance boost and I love the way it sounds at high rpm's. – Andrew from Texas [Part #63-6014]

INCLUDES AN OVERSIZED OILED COTTON FILTER

An oiled High-Flow Air Filter™ (included in the kit) helps increase airflow to your engine—while simultaneously providing exceptional protection from contaminants. The oversized filter shape allows for up to 100,000 miles between cleanings (under normal highway driving conditions). When it does need to be cleaned, you can use K&N cleaning products to quickly and easily restore your filter’s performance. Each intake and filter is designed to last for the life of your vehicle.

INTAKE TUBE DESIGNED JUST FOR F150 V8 MODELS

Since engine combustion is most efficient in an oxygen-rich environment, keeping engine air cooler often significantly increases engine combustion efficiency. The 63-2610 system features a roto-molded HDPE intake tube designed to keep airflow to the throttle body smooth and oxygen-dense.

IMPROVES ENGINE SOUND

Factory intake systems often feature intake tubing with tight bends, baffles, and other obstacles that can slow airflow and muffle engine noise—unlike K&N® intake systems, which are designed to give your engine a more satisfying growl on acceleration, but return to quiet once at speed.

PROTECTED BY K&N’S WARRANTY

Each intake system comes with a 10-Year/Million Mile Limited Warranty***

Legal in 49 states. Not legal for sale or use in California on any pollution controlled motor vehicle.

 

*K&N intake systems can typically be installed in less than 60 minutes.


**Horsepower gains vary among products and applications, but each K&N performance air intake system is designed to increase airflow efficiency for specific vehicles and their engines. Each kit undergoes significant testing to help ensure that the filter and intake tube are engineered to deliver large increases in airflow and horsepower. Please visit individual product pages to view horsepower estimates for your specific vehicle.

***View detailed warranty information here.