Home/1999 Toyota Celica 1.8L L4 Gas

1999 Toyota Celica 1.8L L4 Gas

33-2041-1 K&N Replacement Air Filter

K&N
DIY LEVEL
EASY
MODERATE
ADVANCED
Tools Needed
None
Installation Time
5 Minutes

33-2041-1 K&N Replacement Air Filter

In Stock
1
Add To Cart
Overview
K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s 10-Year/Million Mile Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
More Information
Specifications
DIY LEVEL
EASY
MODERATE
ADVANCED
Tools Needed
None
Installation Time
5 Minutes

33-2052 K&N Replacement Air Filter

K&N
DIY LEVEL
EASY
MODERATE
ADVANCED
Tools Needed
None
Installation Time
5 Minutes

33-2052 K&N Replacement Air Filter

In Stock
1
Add To Cart
Overview
K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s 10-Year/Million Mile Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
More Information
Specifications
DIY LEVEL
EASY
MODERATE
ADVANCED
Tools Needed
None
Installation Time
5 Minutes

57-0502 K&N Performance Air Intake System

K&N
DIY LEVEL
EASY
MODERATE
ADVANCED
Tools Needed
Wrench, Extension, Flat Blade Screwdriver, Allen Wrench
Installation Time
60-90 Minutes

57-0502 K&N Performance Air Intake System

Out of stock
Overview
K&N 57i Series induction kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. The extra surface area of these open-air air filters provides even more airflow at lower restriction than a K&N O/E replacement filter which is limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adapters are made from high quality materials such as steel, aluminum, silicon or reinforced nylon to ensure long life. 57i Series Intakes are not legal for use in California and other US States adopting California emission standards.
More Information
Specifications
DIY LEVEL
EASY
MODERATE
ADVANCED
Tools Needed
Wrench, Extension, Flat Blade Screwdriver, Allen Wrench
Installation Time
60-90 Minutes

69-8750TR K&N Performance Air Intake System

K&N
DIY LEVEL
EASY
MODERATE
ADVANCED
Tools Needed
Wrench, Extension, Flat Blade Screwdriver, Allen Wrench
Installation Time
60-90 Minutes

69-8750TR K&N Performance Air Intake System

Out of stock
Overview
The K&N 69-8750TR Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Toyota Celica models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-8750TR air intake comes with a black rubber topped K&N high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive red powder-coat finish that's made to last and it accommodates the factory mass air sensor and engine vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, pliers, ratchet set and several wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
More Information
Specifications
DIY LEVEL
EASY
MODERATE
ADVANCED
Tools Needed
Wrench, Extension, Flat Blade Screwdriver, Allen Wrench
Installation Time
60-90 Minutes

69-8750TS K&N Performance Air Intake System

K&N
DIY LEVEL
EASY
MODERATE
ADVANCED
Tools Needed
Wrench, Extension, Flat Blade Screwdriver, Allen Wrench
Installation Time
60-90 Minutes

69-8750TS K&N Performance Air Intake System

Out of stock
Overview
The K&N 69-8750TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Toyota Celica II models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-8750TS air intake comes with a black rubber topped K&N high-flow air filter that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, pliers, a ratchet set and several wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
More Information
Specifications
DIY LEVEL
EASY
MODERATE
ADVANCED
Tools Needed
Wrench, Extension, Flat Blade Screwdriver, Allen Wrench
Installation Time
60-90 Minutes

92-2120 K&N Edge Wiper Blades 21"/20"

K&N
Resources

92-2120 K&N Edge Wiper Blades 21"/20"

In Stock
1
Add To Cart
Overview
K&N® wiper blades designed for an easy installation, perfect for a quick DIY project. K&N® windshield wiper blades help resist wind-lift while driving at high speed. Superior quality car wiper blades for all weather performance. Advanced beam blades are designed to match the curvature of modern windshield for a streak-free wipe.
More Information
Specifications
Resources

We use cookies to personalize content and ads, to provide social media features and to analyze our traffic. We also share information about your use of our site with our social media, advertising and analytics partners. Learn more.

ALLOW COOKIES