2001 Subaru Impreza II WRX 2.0L

5 Product Results - Refine Your Results Below
33-2232 K&N Replacement Air Filter
$55.99
Rating:
100% of 100
5/5
In Stock / Free Shipping
Locate A Dealer
Overview
  • Designed to increase horsepower
  • Washable, reusable, and engineered to last for the life of your vehicle
  • Designed to provide high airflow and exceptional filtration
  • Engineered to fit easily into your factory air box
  • 10-Year/Million Mile Limited Warranty
  • Only needs cleaning every 50,000 miles under normal highway driving conditions
  • Emissions legal in all 50 States
  • Will not void vehicle warranty
Detailed Info
K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s 10-Year/Million Mile Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
Reviews
Rating:
100% of 100
5/5
  • Designed to increase horsepower
  • Washable, reusable, and engineered to last for the life of your vehicle
  • Designed to provide high airflow and exceptional filtration
  • Engineered to fit easily into your factory air box
  • 10-Year/Million Mile Limited Warranty
  • Only needs cleaning every 50,000 miles under normal highway driving conditions
  • Emissions legal in all 50 States
  • Will not void vehicle warranty
K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s 10-Year/Million Mile Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
DIY Level

Easy

Installation Time

5-10 Minutes

Tools Typically Needed

Screwdriver

57-0626 K&N Performance Air Intake System
In Stock / Free Shipping
Locate A Dealer
Overview
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Replaces entire factory air intake system
  • Not legal for highway use in states adopting California emission regulations
  • Washable and reusable lifetime air filter
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Easy to install, usually in 90 minutes or less
  • K&N Million Mile Limited Warranty®
Detailed Info
K&N 57i Series induction kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. The extra surface area of these open-air air filters provides even more airflow at lower restriction than a K&N O/E replacement filter which is limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adapters are made from high quality materials such as steel, aluminum, silicon or reinforced nylon to ensure long life. 57i Series Intakes are not legal for use in California and other US States adopting California emission standards.
Reviews
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Replaces entire factory air intake system
  • Not legal for highway use in states adopting California emission regulations
  • Washable and reusable lifetime air filter
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Easy to install, usually in 90 minutes or less
  • K&N Million Mile Limited Warranty®
K&N 57i Series induction kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. The extra surface area of these open-air air filters provides even more airflow at lower restriction than a K&N O/E replacement filter which is limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adapters are made from high quality materials such as steel, aluminum, silicon or reinforced nylon to ensure long life. 57i Series Intakes are not legal for use in California and other US States adopting California emission standards.
DIY Level

Moderate

Installation Time

60-90 Minutes

Tools Needed

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

57A-6018 K&N Performance Air Intake System
In Stock / Free Shipping
Locate A Dealer
Overview
  • Outer shell keeps engine heat out
  • Fresh air inlet
  • Washable reusable air filter
  • Outstanding air filtration
Detailed Info
K&N Apollo Cold Air Induction Systems incorporate a washable/reusable K&N High-Flow Air Filter within a protective shell. They come with custom mounting hardware to fit specific vehicle applications. The Apollo's shell reduces heat build-up and feeds cool air into your engine, resulting in improved volumetric efficiency and increased power gains. Apollo Cold Air Induction Systems allow for updating your vehicle's intake system while retaining a closed environment.
Reviews
  • Outer shell keeps engine heat out
  • Fresh air inlet
  • Washable reusable air filter
  • Outstanding air filtration
K&N Apollo Cold Air Induction Systems incorporate a washable/reusable K&N High-Flow Air Filter within a protective shell. They come with custom mounting hardware to fit specific vehicle applications. The Apollo's shell reduces heat build-up and feeds cool air into your engine, resulting in improved volumetric efficiency and increased power gains. Apollo Cold Air Induction Systems allow for updating your vehicle's intake system while retaining a closed environment.
DIY Level

Moderate

Installation Time

60-90 Minutes

Tools Needed

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

69-8001TS K&N Performance Air Intake System
$315.99
Rating:
100% of 100
5/5
In Stock / Free Shipping
Locate A Dealer
Overview
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Free-flowing aluminum tube
  • Easy to install, usually in 90 minutes or less
  • Filter lasts up to 100,000 miles before service is required
  • Replaces entire factory air intake system
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty
Detailed Info
The K&N 69-8001TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Subaru Impreza WRX Turbo and WRX STi Turbo models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-8001TS air intake comes with an ultra-lightweight carbon fiber topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s intake duct for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and ratchet set. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
Reviews
Rating:
100% of 100
5/5
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Free-flowing aluminum tube
  • Easy to install, usually in 90 minutes or less
  • Filter lasts up to 100,000 miles before service is required
  • Replaces entire factory air intake system
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty
The K&N 69-8001TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Subaru Impreza WRX Turbo and WRX STi Turbo models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-8001TS air intake comes with an ultra-lightweight carbon fiber topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s intake duct for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and ratchet set. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
DIY Level

Moderate

Installation Time

60-90 Minutes

Tools Needed

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

69-8001TWR K&N Performance Air Intake System
In Stock / Free Shipping
Locate A Dealer
Overview
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Free-flowing aluminum tube
  • Easy to install, usually in 90 minutes or less
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Replaces entire factory air intake system
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty
Detailed Info
The K&N 69-8001TWR Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Subaru Impreza WRX and WRX STI models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-8001TWR air intake comes with an ultra-lightweight carbon fiber topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive wrinkle red powder-coat finish that's made to last and it accommodates the factory mass air sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and ratchet set. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
Reviews
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Free-flowing aluminum tube
  • Easy to install, usually in 90 minutes or less
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Replaces entire factory air intake system
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty
The K&N 69-8001TWR Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Subaru Impreza WRX and WRX STI models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-8001TWR air intake comes with an ultra-lightweight carbon fiber topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive wrinkle red powder-coat finish that's made to last and it accommodates the factory mass air sensor. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver and ratchet set. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
DIY Level

Moderate

Installation Time

60-90 Minutes

Tools Needed

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

Chat Now Chat Now