FOURTEEN & SIXTEEN INCH CUSTOM ASSEMBLIES.
Race ready low profile air cleaner. Drops filter 7/8" or 1-1/4" below carburetor flange. 5-1/8" flange fits all popular 4 barrel carburetors. Four element heights to fit a wide variety of applications. Note: 7/8" drop will fit carburetors with electric choke mechanisms.
FOURTEEN INCH AIR FILTERS - CHROME
Popular 14" chrome racing style assembly. Raises element 9/16" above carburetor flange. 5-1/8" flange fits all popular 4 barrel carburetors. Four element heights to fit a wide variety of applications. Will clear HEI distributors.
14 & 16 INCH DOMINATOR AIR FILTERS - CHROME
14" DOMINATOR AIR FILTER
K&N's 14" diameter race-ready air cleaners can flow the amount of air required for the Holley Dominator carburetors. 7-5/16" flange base has a 3/4" rise velocity stack.
| Neck Flange |
Element Height |
K&N P/N Element |
Filter OD |
Foot Note |
K&N P/N Complete Assembly |
Total** Height |
| 7-5/16" | 4" | E-3750 | 14" | 5 | 60-1235 | 5.50" |
| 7-5/16" | 5" | E-3760 | 14" | 5 | 60-1245 | 6.50" |
| 7-5/16" | 6" | E-3770 | 14" | 5 | 60-1255 | 7.50" |
16" DOMINATOR AIR FILTER
This 16 inch Dominator Assembly flows up to 1,150 CFM (cubic feet per minute).
FOURTEEN INCH TRIANGLE AIR FILTER - CHROME
K&N's new custom chrome triangle assembly is designed to make any engine compartment come to life. This triangle assembly comes with a 3" high K&N Filtercharger®, has smooth radius corners and fits most carburetors with 5-1/8" flange.
| Neck Flange |
Element Height |
K&N P/N Element |
Filter OD |
Foot Note |
K&N P/N Complete Assembly |
Total** Height |
| 5-1/8" | 3" | E-3737 | 14" | - | 60-1470 | 3.62" |
Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle. FOOTNOTES 1) Includes vent kit 2) Vent kit available, P/N 85-1190 3) 1/2" vent tube on base 4) 3/4" vent tube on base 5) Top is chrome & base is hi-temp nylon 6) Stainless Steel top & chrome base. 7) Base and top are chrome plated. * Will not fit Edelbrock carbs with electric choke. ** Total Height = minimum clearance required above carburetor flange.