2017 Polaris RZR XP 4 1000 EPS High Lifter Ed. 999

4 Product Results - Refine Your Results Below
63-1133 K&N Performance Air Intake System
All Models
In Stock / Free Shipping
Locate A Dealer
Overview
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Free-flowing aluminum intake tubes
  • Easy to install, usually in 90 minutes or less
  • Not legal for highway use in states adopting California emission regulations
  • Replaces entire factory air intake system
  • Washable and reusable air filters
Detailed Info
The K&N 63-1133 AirCharger air intake system replaces the restrictive factory air filter and air intake housing in some Polaris Ranger RZR models. K&N air intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-1133 air intake comes with a K&N high-flow air filter which is protected from the elements with an enclosed filter housing. Air is directed through a free-flowing aluminum intake tube into the engine’s throttle body for a guaranteed power gain. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less. The tools needed are a ratchet set, a few wrenches, and flat blade screwdriver. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.
Reviews
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Free-flowing aluminum intake tubes
  • Easy to install, usually in 90 minutes or less
  • Not legal for highway use in states adopting California emission regulations
  • Replaces entire factory air intake system
  • Washable and reusable air filters
The K&N 63-1133 AirCharger air intake system replaces the restrictive factory air filter and air intake housing in some Polaris Ranger RZR models. K&N air intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-1133 air intake comes with a K&N high-flow air filter which is protected from the elements with an enclosed filter housing. Air is directed through a free-flowing aluminum intake tube into the engine’s throttle body for a guaranteed power gain. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less. The tools needed are a ratchet set, a few wrenches, and flat blade screwdriver. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.
DIY Level

Moderate

Installation Time

60-90 Minutes

Tools Needed

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

63-1143 K&N Performance Air Intake System
All Models
In Stock / Free Shipping
Locate A Dealer
Overview
  • Improved air flow for engine performance
  • Increased air flow for clutch longevity
  • Designed to improve throttle response and engine sound
  • Air scoop system specifically designed for Polaris RZR XP vehicles provides ideal source of fresh air in extreme off-road conditions
  • K&N Million Mile Limited Warranty
Detailed Info
The 63-1143 scoop system is designed to provide the engine with a higher volume of fresh air and helps keep the clutch cool through the use of two aerodynamic scoops and DryCharger® pre-filters to preserve your RZR’s performance. The scoops are composed of highly heat-resistant high-density polyethylene, and are engineered for durability in dirty, sandy environments. The system can be paired with either a K&N® or OEM intake system,. Installation can typically be completed in less than 30 minutes with only basic hand tools, and all necessary hardware is included.
Reviews
  • Improved air flow for engine performance
  • Increased air flow for clutch longevity
  • Designed to improve throttle response and engine sound
  • Air scoop system specifically designed for Polaris RZR XP vehicles provides ideal source of fresh air in extreme off-road conditions
  • K&N Million Mile Limited Warranty
The 63-1143 scoop system is designed to provide the engine with a higher volume of fresh air and helps keep the clutch cool through the use of two aerodynamic scoops and DryCharger® pre-filters to preserve your RZR’s performance. The scoops are composed of highly heat-resistant high-density polyethylene, and are engineered for durability in dirty, sandy environments. The system can be paired with either a K&N® or OEM intake system,. Installation can typically be completed in less than 30 minutes with only basic hand tools, and all necessary hardware is included.
DIY Level

Moderate

Installation Time

60-90 Minutes

Tools Needed

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

KN-198 K&N Oil Filter
All Models
$15.99
Rating:
100% of 100
5/5
In Stock / Free Shipping
Locate A Dealer
Overview
  • O/E replacement oil filters for most cars, trucks, SUV's, motorcycles, & ATV's
  • 17 mm exposed nut designed for easy oil filter removal
  • Heavy duty construction for extreme conditions
  • Anti-drain back valve (where applicable) eliminates dry starts, prevents oil from draining back into crankcase during engine shutdown
  • Approved for racing use by MotoAmerica and the AMA
Detailed Info
K&N powersports oil filters contain a modern synthetic filter media, designed for ultimate flow with less pressure drop, yet engineered for outstanding filtration. K&N powersports 'spin-on' oil filters feature a heavy-duty metal can. Most of these have a 17 mm nut affixed onto the end that allows for easy removal. The 17 mm nut is crossed-drilled so racers can safety wire the filter to their bike.
Reviews
Rating:
100% of 100
5/5
  • O/E replacement oil filters for most cars, trucks, SUV's, motorcycles, & ATV's
  • 17 mm exposed nut designed for easy oil filter removal
  • Heavy duty construction for extreme conditions
  • Anti-drain back valve (where applicable) eliminates dry starts, prevents oil from draining back into crankcase during engine shutdown
  • Approved for racing use by MotoAmerica and the AMA
K&N powersports oil filters contain a modern synthetic filter media, designed for ultimate flow with less pressure drop, yet engineered for outstanding filtration. K&N powersports 'spin-on' oil filters feature a heavy-duty metal can. Most of these have a 17 mm nut affixed onto the end that allows for easy removal. The 17 mm nut is crossed-drilled so racers can safety wire the filter to their bike.
DIY Level

Easy

Installation Time

20-30 Minutes

PL-1014 K&N Replacement Air Filter
All Models
$76.99
Rating:
100% of 100
5/5
In Stock / Free Shipping
Locate A Dealer
Overview
  • Designed to provide increased horsepower and acceleration
  • Specifically developed for Off-Road, Motocross, ATVs, UTVs and Side by Sides
  • Pleated cotton media provides a large filtration area offering low restriction, high-capacity and long service intervals
  • Multiple layers of woven cotton gauze media offers excellent filtration
  • Fits directly into OEM air box with application specific sealing bead ensuring a precise fit
  • No fuel management modifications are required to obtain increased performance
  • Washable & reusable, most are pre-oiled and ready to ride!
  • One Year Limited Warranty
Detailed Info
K&N off-road replacement air filters are ideal for extended use in dirty and dusty off-road riding and provide clean carburetion even at high altitude. Generally, no jet changes are required with just a K&N filter element. K&N replacement air filters are washable and reusable and provide high air-flow with excellent filtration.
Reviews
Rating:
100% of 100
5/5
  • Designed to provide increased horsepower and acceleration
  • Specifically developed for Off-Road, Motocross, ATVs, UTVs and Side by Sides
  • Pleated cotton media provides a large filtration area offering low restriction, high-capacity and long service intervals
  • Multiple layers of woven cotton gauze media offers excellent filtration
  • Fits directly into OEM air box with application specific sealing bead ensuring a precise fit
  • No fuel management modifications are required to obtain increased performance
  • Washable & reusable, most are pre-oiled and ready to ride!
  • One Year Limited Warranty
K&N off-road replacement air filters are ideal for extended use in dirty and dusty off-road riding and provide clean carburetion even at high altitude. Generally, no jet changes are required with just a K&N filter element. K&N replacement air filters are washable and reusable and provide high air-flow with excellent filtration.
DIY Level

Easy

Installation Time

5-10 Minutes

Tools Typically Needed

Screwdriver

Chat Now Chat Now