Search By Vehicle
*
Search By Dimension

K&N Push-In, Screw-In, & Covered Crankcase Vent Filters & Valve Cover Adapters

Tower Base Covered Crankcase Vent Filter with Multi-Hose Vents

Tower Base Covered Crankcase Vent Filter with Multi-Hose Vents

High Performance Racing Style - Designed for big bore and full race VW and other like-size engines needing maximum crankcase breathing filtration. Tower design saves blow-by oil while relieving crankcase pressure. High capacity filter element stops dirt from reaching oil supply when decelerating. When installing, bottom fitting should connect to engine's lowest pressure point (such as a rocker cover). Top side fitting should connect to engine's highest pressure point (such as the crankcase).

CAST ALUMINUM TOWER has a universal mount, internal oil baffles and three 3/8" NPT outlets for braided hose fittings.

STEEL TOWER has a chrome finish and no inner baffles. Features an adjustable steel mounting bracket and three 1/2" vent tubes for use with rubber slip-on hose.

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

Tower Style Tower Dimensions Number of Outlets Cover Diameter & Height Air Filter Diameter & Height Replacement Air Filter Complete Filter Assembly
Cast Aluminum 2 1/8"D x 4 3/4"H 3 3/8" NPT 4"OD x 3 1/2"H 3 1/2" x 3 1/2" RE-0280 62-1400
Chromed Steel 2"D x 4"H 3 1/2" hose 4"OD x 3 1/2"H 3 1/2" x 3 1/2" RE-0280 62-1210

Flat Base Covered Crankcase Vent Filters with Remote Mount

Flat Base Covered Crankcase Vent Filters with Remote Mount

Designed for stock VW and other small displacement racing engines. Remote mount allows use of 1/2" or 3/8" ID vent hoses. Comes with satin anodized aluminum cover 4" in diameter and 3 1/2" high. Element is removable for easy servicing. Mounting bracket included - universal type for bolt-on or weld-on.

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

Number Of Outlets Cover Diameter & Height Air Filter Diameter & Height Replacement Air Filter Complete Filter Assembly
Three 1/2" hoses 4"OD x 3 1/2"H 3 1/2" x 3 1/2" E-3050 62-1190
Three 3/8" hoses 4"OD x 3 1/2"H 3 1/2" x 3 1/2" E-3050

Rubber Mounting Flanged Covered Air Filters

Rubber Mounting Flanged Covered Air Filters

Ideal for air compressors, construction and farming equipment, fork lifts, stationary power plants, etc. Designed for round intake flanges. Easy to install. Rubber flange design grips securely. The flange can be stretched to fit in between sizes. Aluminum cover is anodized for durability.

RUBBER Mounting Flange I.D. Bonnet Diameter Air Filter Diameter & Height Replacement Air Filter Complete Filter Assembly
1" 4" 3 1/2" x 3 1/2" RE-0200 54-1010
1 1/4" 4" 3 1/2" x 3 1/2" RE-0220 54-1020
1 1/2" 4" 3 1/2" x 3 1/2" RE-0240 54-1030
1 3/4" 4" 3 1/2" x 3 1/2" RE-0260 54-1040
2" 4" 3 1/2" x 3 1/2" RE-0280 54-1050
2 1/2" 5" 5" x 2 3/4" RE-0380 54-1110

Push-In Crankcase Vent Filter

Push-In Crankcase Vent Filter

Universal "Push-In" filter for valve covers. Not recommended to be used as the oil filler plug, as repeated removal will damage the filter.

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

Vent Filter Size K&N Crank Case Vent Filter
3"O.D.; 2-1/2"H; 1 1/4" hole with shield 62-1516
3"O.D.; 2-1/2"H; 1 1/4" hole 62-1490
2"O.D.; 2-1/4"H; 1 1/4" hole 62-1485
1 1/8" Flange OD; 9/16" Flange ID; 2" OD; 2 1/8" H 62-1230

Ford Screw-In Breather

Ford Screw-In Breather

This filter is designed to screw directly into threaded Ford valve covers. Filter dimensions: 3" O.D. Chrome top; 1-3/4" height; Flange dimension: 1-1/4" O.D., 3/4" L

Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

Description K&N Crank Case Vent Filter
Ford Screw In Breather 62-1495

Nylon Reinforced Valve Cover Adapters with Filter

Nylon Reinforced Valve Cover Adapters with Filter

Nylon reinforced adapter plus a 3" O.D. x 2-1/2" tall filter, with or without deflector shield. Universal mount, requires a 1-1/4" I.D. hole, and a 2" square, flat surface. Comes complete with mounting hardware.

Description K&N Crank Case Vent Filter
Without deflector shield 85-1221
With deflector shield 85-1222

Nylon Reinforced Valve Cover Adapters

Nylon Reinforced Valve Cover Adapters

Requires a 1-1/2" I.D. (flanged filter to be purchased separately)

Description K&N Crank Case Vent Filter
Screws into Ford valve covers 85-1200
Screws into late GM valve covers 85-1210
Universal mount (see style 4 above) 85-1220