Search By Vehicle
Find Parts for your vehicle
*
Search By Dimension

K&N Plenums & Weber Adapter

K&N Custom Plenum

K&N Custom Plenum

Cast aluminum plenum, beautifully finished with black powder coating and natural aluminum highlights. The plenum is designed to fit most American 4 barrel carb that have a 5-1/8" flange. Also will fit the Weber DGV carburetor when used with K&N adapter 85-1061. Designed for cold air intake, plenum has a single snorkel outlet that can be fitted with a 4" I.D. hose running to a remote air filter. A K&N universal filter with a 4" flange can also be clamped directly on the snorkel as well. See the Universal pages for filters that will fit onto the inlet. The outside diameter of the plenum is 9" and the snorkel sticks out 6" from the center of the plenum. Minimum clearance required above the carburetor flange is 3-1/8". Customer must provide 1/4"-20 hold down stud.

Note: The custom plenum is recommended for small displacement engines (less than 200 C.I.) or low revving V6-V8 engines. If the engine requires more than 45 sq. in. of filter area then the plenum should not be used because the carburetor would have to be re-jetted and a loss of high R.P.M. power will be the result.

Custom Plenum - 85-1060


K&N Mini Plenum

K&N Mini Plenum

Cast aluminum plenum designed to fit the Weber DGV carburetors. Single or dual snorkel accepts 2-1/2" I.D. hose or any 2-1/2" flanged K&N universal air filter (See Universal pages for filters that will fit). Ideal for cold air applications with remote mounted air filter, the diameter at the carburetor flange is 5-1/8", and the snout sticks out 5" from the center of the adapter. The clearance needed above the carburetor flange is 2-1/2".

Single Snout for Weber DGV series - 85-8921
Dual Snout for Weber DGV series - 85-8927


Weber DGV Air Cleaner Adapter

Weber DGV Air Cleaner Adapter

Mini-Trucks, Import Cars, Off-Road Racers K&N's complete selection of custom round air cleaners (5-1/8" flange) can now be adapted to the ever popular Weber DGV series carburetor.

You now have a choice of air cleaner diameters from the MINI seven incher all the way up to the BIG FOURTEENS. Select from OPEN 360° custom chrome, tall velocity stacks, or even the full size custom plenum. Even the 14" drop base air cleaner can be used.

See the Custom Assemblies Section for filters and base plates that will fit and for the various sizes and styles of air cleaners available. Keep in mind that the flange must be 5-1/8" ID to work with the DGV adapter. K&N DGV adapter comes complete with gaskets and mounting hardware - except customer must provide 1/4"-20 center stud.

DGV Adapter Kit - 85-1061


These filters products are legal ONLY for racing vehicles. Not applicable, nor intended for use on emission controlled street or highway vehicles.