2014 Dodge Ram 2500 5.7L

10 Product Results - Refine Your Results Below
20-1561 K&N Throttle Control Module
All Models
Out of Stock / Free Shipping
Overview
  • Designed to improve throttle response and acceleration
  • Easy plug and play installation
  • No software required and can be tuned on the go
  • Improves pedal sensitivity without modifying factory ECU settings
  • Sends a modified signal directly to the throttle body
  • Includes the module, wiring harness, adjustable dial, and hardware
  • 90 Day Limited Warranty
Detailed Info
The K&N Throttle Control Module is designed to improve throttle response and acceleration, and improves pedal sensitivity without modifying factory ECU settings. The Throttle Control Module processes input data from the gas pedal and bypasses the factory signal to the vehicle's ECU, sending a modified signal directly to the throttle body creating an increase in throttle responsiveness that will make your car feel like a whole new machine. The Throttle Control Module can typically be installed in less than 30 minutes with no software required, and is adjustable on the go, helping you fine tune the sensitivity of your throttle response. The kit includes the module, wiring harness, adjustable knob, hardware, and detailed instructions, and is covered under K&N's 90 Day Limited Warranty.
Reviews
  • Designed to improve throttle response and acceleration
  • Easy plug and play installation
  • No software required and can be tuned on the go
  • Improves pedal sensitivity without modifying factory ECU settings
  • Sends a modified signal directly to the throttle body
  • Includes the module, wiring harness, adjustable dial, and hardware
  • 90 Day Limited Warranty
The K&N Throttle Control Module is designed to improve throttle response and acceleration, and improves pedal sensitivity without modifying factory ECU settings. The Throttle Control Module processes input data from the gas pedal and bypasses the factory signal to the vehicle's ECU, sending a modified signal directly to the throttle body creating an increase in throttle responsiveness that will make your car feel like a whole new machine. The Throttle Control Module can typically be installed in less than 30 minutes with no software required, and is adjustable on the go, helping you fine tune the sensitivity of your throttle response. The kit includes the module, wiring harness, adjustable knob, hardware, and detailed instructions, and is covered under K&N's 90 Day Limited Warranty.
DIY Level

Moderate

Installation Time

1 hour

Tools Needed

Drill

20-2599 K&N Throttle Control Module
All Models
$274.99
Rating:
100% of 100
5/5
In Stock / Free Shipping
Locate A Dealer
Overview
  • Easy plug & play installation
  • No modifications or software needed
  • In-cab adjustability
  • Stackable with K&N® Boost Control Module
  • Compatible with most other performance upgrades
Detailed Info
The K&N Throttle Control Module is designed to improve throttle response and acceleration, and increases pedal sensitivity without modifying factory ECU settings. The system processes input data from the gas pedal, and modifies the signal before sending it to the ECU for an adjustable level of sensitivity, creating an increase in throttle responsiveness that will make your car feel like a whole new machine.

The Throttle Control Module can typically be installed in less than 30 minutes with no software required, and is adjustable on-the-go, helping you fine-tune the sensitivity of your throttle response. The kit includes the module, wiring harness, adjustable knob, hardware, and detailed instructions, and is covered under K&N’s 90-Day Limited Warranty.

How It Works - The Throttle Control Module processes input data from the gas pedal, and modifies the signal before sending it to the ECU for an adjustable level of sensitivity, creating an increase in throttle responsiveness.

Wire harness - The wire harness connects the Throttle Control Module’s electronic control unit to the throttle pedal on the vehicle, allowing a direct connection between your gas pedal and throttle body. The plugs and connectors are designed to attach directly to your vehicle’s stock components for easy plug-and-play installation.

Control dial - The stylish aluminum control dial installs into the cab of your vehicle to give you direct control over your Throttle Control Module, allowing you to adjust how much or how little the throttle signal is adjusted. Not legal for sale or use on any pollution controlled motor vehicle in California.
Reviews
Rating:
100% of 100
5/5
  • Easy plug & play installation
  • No modifications or software needed
  • In-cab adjustability
  • Stackable with K&N® Boost Control Module
  • Compatible with most other performance upgrades
The K&N Throttle Control Module is designed to improve throttle response and acceleration, and increases pedal sensitivity without modifying factory ECU settings. The system processes input data from the gas pedal, and modifies the signal before sending it to the ECU for an adjustable level of sensitivity, creating an increase in throttle responsiveness that will make your car feel like a whole new machine.

The Throttle Control Module can typically be installed in less than 30 minutes with no software required, and is adjustable on-the-go, helping you fine-tune the sensitivity of your throttle response. The kit includes the module, wiring harness, adjustable knob, hardware, and detailed instructions, and is covered under K&N’s 90-Day Limited Warranty.

How It Works - The Throttle Control Module processes input data from the gas pedal, and modifies the signal before sending it to the ECU for an adjustable level of sensitivity, creating an increase in throttle responsiveness.

Wire harness - The wire harness connects the Throttle Control Module’s electronic control unit to the throttle pedal on the vehicle, allowing a direct connection between your gas pedal and throttle body. The plugs and connectors are designed to attach directly to your vehicle’s stock components for easy plug-and-play installation.

Control dial - The stylish aluminum control dial installs into the cab of your vehicle to give you direct control over your Throttle Control Module, allowing you to adjust how much or how little the throttle signal is adjusted. Not legal for sale or use on any pollution controlled motor vehicle in California.
DIY Level

Moderate

Installation Time

1 hour

Tools Needed

Drill

33-2247 K&N Replacement Air Filter
All Models
$61.99
Rating:
99% of 100
4.95/5
In Stock / Free Shipping
Locate A Dealer
Overview
  • Designed to increase horsepower
  • Washable, reusable, and engineered to last for the life of your vehicle
  • Designed to provide high airflow and exceptional filtration
  • Engineered to fit easily into your factory air box
  • 10-Year/Million Mile Limited Warranty
  • Only needs cleaning every 50,000 miles under normal highway driving conditions
  • Emissions legal in all 50 States
  • Will not void vehicle warranty
Detailed Info
K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s 10-Year/Million Mile Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
Reviews
Rating:
99% of 100
4.95/5
  • Designed to increase horsepower
  • Washable, reusable, and engineered to last for the life of your vehicle
  • Designed to provide high airflow and exceptional filtration
  • Engineered to fit easily into your factory air box
  • 10-Year/Million Mile Limited Warranty
  • Only needs cleaning every 50,000 miles under normal highway driving conditions
  • Emissions legal in all 50 States
  • Will not void vehicle warranty
K&N® washable, reusable High-Flow Air Filters™ feature a state-of-the-art design of layered, oiled cotton media engineered to improve airflow and capture contaminants, and are designed to provide an increase in horsepower. Each performance air filter is reusable, engineered to last for the entire lifespan of your vehicle, and backed by K&N’s 10-Year/Million Mile Limited Warranty. K&N drop-in replacement filters are designed to install easily into your factory air box. Upgrade today and start enjoying superior airflow and superior performance from K&N’s most popular product!
DIY Level

Easy

Installation Time

5-10 Minutes

Tools Typically Needed

Screwdriver

57-1561 K&N Performance Air Intake System
All Models
$295.99
Rating:
100% of 100
5/5
In Stock / Free Shipping
Locate A Dealer
Overview
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Easy to install, usually in 90 minutes or less
  • Free-flowing high density polyethylene tube
  • Replaces entire factory air intake system
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty
Detailed Info
The K&N 57-1561 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Ram 1500 and Dodge Ram 1500 models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 57-1561 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory air temperature sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and several wrenches. K&N 57 Series FIPK's are street legal in all 50 US states and come with K&N's Million Mile Limited Warranty.
Reviews
Rating:
100% of 100
5/5
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Easy to install, usually in 90 minutes or less
  • Free-flowing high density polyethylene tube
  • Replaces entire factory air intake system
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty
The K&N 57-1561 FIPK air intake system replaces the restrictive factory air filter and air intake housing in some Ram 1500 and Dodge Ram 1500 models. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 57-1561 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory air temperature sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and several wrenches. K&N 57 Series FIPK's are street legal in all 50 US states and come with K&N's Million Mile Limited Warranty.
DIY Level

Moderate

Installation Time

60-90 Minutes

Tools Needed

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

63-1561 K&N Performance Air Intake System
All Models
$294.99
Rating:
99% of 100
4.95/5
In Stock / Free Shipping
Locate A Dealer
Overview
  • Guaranteed horsepower gain
  • Designed to improve throttle response and engine sound
  • Free-Flowing High Density Polyethylene Tube
  • Replaces entire factory air intake system
  • Not legal for highway use in states adopting California emission regulations
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Easy to install, usually in 90 minutes or less
  • K&N Million Mile Limited Warranty
Detailed Info
The K&N AirCharger 63-1561 air intake system replaces your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-1561 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that directs cooler air into the custom molded intake for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install using commonly available tools. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.
Reviews
Rating:
99% of 100
4.95/5
  • Guaranteed horsepower gain
  • Designed to improve throttle response and engine sound
  • Free-Flowing High Density Polyethylene Tube
  • Replaces entire factory air intake system
  • Not legal for highway use in states adopting California emission regulations
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Easy to install, usually in 90 minutes or less
  • K&N Million Mile Limited Warranty
The K&N AirCharger 63-1561 air intake system replaces your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your vehicle’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-1561 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that directs cooler air into the custom molded intake for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install using commonly available tools. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards.
DIY Level

Moderate

Installation Time

60-90 Minutes

Tools Needed

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

71-1561 K&N Performance Air Intake System
All Models
$343.99
Rating:
100% of 100
5/5
In Stock / Free Shipping
Locate A Dealer
Overview
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Washable and reusable air filter
  • Made from all black components
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Easy to install, usually in 90 minutes or less
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty
Detailed Info
The K&N 71-1561 Blackhawk Induction Air Intake System is a free-flowing, mandrel-bent aluminum tube air intake system that is guaranteed to gain power. It replaces your vehicle’s restrictive factory air filter and air intake housing. This low restriction air intake allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more power and acceleration. This K&N Blackhawk Induction Air Intake System comes with black components including the K&N high-flow air filter and heat shield. The attractive textured black powder-coated finish tube features an engraved K&N plate welded on to which gives it a clean, high-performance look under the hood. The intake tube accommodates the factory air temperature sensor and crank case vent hose. The oversized cone shaped air filter is made from an oil-free synthetic filter media that can be used for up to 100,000 miles before cleaning is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using the existing factory mounting points using commonly available tools. Some K&N Blackhawk Induction Systems are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 71-1561 vehicle applications to determine the legal status for each vehicle.
Reviews
Rating:
100% of 100
5/5
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Washable and reusable air filter
  • Made from all black components
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Easy to install, usually in 90 minutes or less
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty
The K&N 71-1561 Blackhawk Induction Air Intake System is a free-flowing, mandrel-bent aluminum tube air intake system that is guaranteed to gain power. It replaces your vehicle’s restrictive factory air filter and air intake housing. This low restriction air intake allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more power and acceleration. This K&N Blackhawk Induction Air Intake System comes with black components including the K&N high-flow air filter and heat shield. The attractive textured black powder-coated finish tube features an engraved K&N plate welded on to which gives it a clean, high-performance look under the hood. The intake tube accommodates the factory air temperature sensor and crank case vent hose. The oversized cone shaped air filter is made from an oil-free synthetic filter media that can be used for up to 100,000 miles before cleaning is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using the existing factory mounting points using commonly available tools. Some K&N Blackhawk Induction Systems are not legal for sale or use in California and other states adopting California emission standards while others are 50 state legal. View the 71-1561 vehicle applications to determine the legal status for each vehicle.
DIY Level

Moderate

Installation Time

60-90 Minutes

Tools Needed

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

77-1561KP K&N Performance Air Intake System
All Models
$367.99
Rating:
95% of 100
4.75/5
In Stock / Free Shipping
Locate A Dealer
Overview
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Free-flowing aluminum tube
  • Replaces entire factory air intake system
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Easy to install, usually in 90 minutes or less
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty
Detailed Info
The K&N 77-1561KP high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Ram 1500/2500 and Dodge Ram 1500/2500 Pickup models. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The 77-1561KP air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and several wrenches. Some K&N 77 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
Reviews
Rating:
95% of 100
4.75/5
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Free-flowing aluminum tube
  • Replaces entire factory air intake system
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Easy to install, usually in 90 minutes or less
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty
The K&N 77-1561KP high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Ram 1500/2500 and Dodge Ram 1500/2500 Pickup models. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The 77-1561KP air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory air temperature sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, ratchet set and several wrenches. Some K&N 77 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.
DIY Level

Moderate

Installation Time

60-90 Minutes

Tools Needed

Wrench, Extension, Flat Blade Screwdriver, Allen Wrench

HP-1017 K&N Oil Filter
All Models
$15.99
Rating:
97% of 100
4.85/5
In Stock / Free Shipping
Locate A Dealer
Overview
  • O/E replacement oil filters for most cars, trucks, SUV's, motorcycles, & ATV's
  • 1 inch exposed nut designed for easy oil filter removal
  • Heavy duty construction for extreme conditions
  • Anti-drain back valve (where applicable) eliminates dry starts, prevents oil from draining back into crankcase during engine shutdown
Detailed Info
Originally developed for demanding race applications, K&N's Premium Wrench-Off Oil Filter has become a favorite among consumers for its durability and easy removal. Most of our automotive and marine oil filters come with a 1 inch nut welded to the top of the canister so they can be easily wrenched-off with a standard tool. To satisfy the demands of racers, our oil filter has many features over and above the requirements of most vehicles. We use thicker canister walls for extra strength and durability which reduces the risk of damage from loose rocks and debris. The drilled hole on the nut provides for safety wire attachment. Our oil filters also use a resin impregnated cellulose filter media. This allows for higher flow rates while providing outstanding filtration.
Reviews
Rating:
97% of 100
4.85/5
  • O/E replacement oil filters for most cars, trucks, SUV's, motorcycles, & ATV's
  • 1 inch exposed nut designed for easy oil filter removal
  • Heavy duty construction for extreme conditions
  • Anti-drain back valve (where applicable) eliminates dry starts, prevents oil from draining back into crankcase during engine shutdown
Originally developed for demanding race applications, K&N's Premium Wrench-Off Oil Filter has become a favorite among consumers for its durability and easy removal. Most of our automotive and marine oil filters come with a 1 inch nut welded to the top of the canister so they can be easily wrenched-off with a standard tool. To satisfy the demands of racers, our oil filter has many features over and above the requirements of most vehicles. We use thicker canister walls for extra strength and durability which reduces the risk of damage from loose rocks and debris. The drilled hole on the nut provides for safety wire attachment. Our oil filters also use a resin impregnated cellulose filter media. This allows for higher flow rates while providing outstanding filtration.
DIY Level

Easy

Installation Time

20-30 Minutes

PS-1017 K&N Oil Filter
All Models
$7.99
Rating:
100% of 100
5/5
In Stock / Free Shipping
Locate A Dealer
Overview
  • High flow filter designed to improve performance
  • Designed for synthetic and conventional oils
  • Premium filtration media for increased capacity
  • Provides outstanding filtration
Detailed Info
K&N Performance Silver Oil Filters have been specially designed for professional installers and service providers. Their high flow design can help to improve engine performance by reducing oil filter restriction. Our Performance Silver Oil Filters have a fluted canister shape so they can be removed with a traditional oil filter wrench commonly available to commercial installers. These Performance Silver oil filters provide outstanding filtration and engine protection throughout their service life. They are engineered to handle all grades of synthetic, conventional and blended motor oils. The pleated media provides high capacity making them suitable for extended oil change intervals when used in accordance with the vehicle and motor oil manufacturers recommendation. K&N Performance Silver Oil Filters are available for canister and cartridge type oil filter applications.
Reviews
Rating:
100% of 100
5/5
  • High flow filter designed to improve performance
  • Designed for synthetic and conventional oils
  • Premium filtration media for increased capacity
  • Provides outstanding filtration
K&N Performance Silver Oil Filters have been specially designed for professional installers and service providers. Their high flow design can help to improve engine performance by reducing oil filter restriction. Our Performance Silver Oil Filters have a fluted canister shape so they can be removed with a traditional oil filter wrench commonly available to commercial installers. These Performance Silver oil filters provide outstanding filtration and engine protection throughout their service life. They are engineered to handle all grades of synthetic, conventional and blended motor oils. The pleated media provides high capacity making them suitable for extended oil change intervals when used in accordance with the vehicle and motor oil manufacturers recommendation. K&N Performance Silver Oil Filters are available for canister and cartridge type oil filter applications.
DIY Level

Easy

Installation Time

20-30 Minutes

SS-1017 K&N Oil Filter; Billet
All Models
In Stock / Free Shipping
Locate A Dealer
Overview
  • Lasts the lifetime of your vehicle under normal vehicle operating conditions
  • Stainless Steel Micro-Screen Filtration
  • Reusable Oil Filter
  • Billet Aluminum Housing
  • Embedded Neodymium Magnets
Detailed Info
A K&N reusable oil filter by Pure Power will last the lifetime of your vehicle under normal vehicle operating conditions. The filter housing, bypass valve and call plate are CNC machined from Billet 6061 T6 Aluminum. The mechanical filtration is accomplished with a dual woven T 304 stainless steel micro-screen that provides excellent engine protection while providing a substantial increase in oil flow when compared to standard disposable oil filters. U.S. Pat. No. 7,413,889 and U.S. Pat. Pending
Reviews
  • Lasts the lifetime of your vehicle under normal vehicle operating conditions
  • Stainless Steel Micro-Screen Filtration
  • Reusable Oil Filter
  • Billet Aluminum Housing
  • Embedded Neodymium Magnets
A K&N reusable oil filter by Pure Power will last the lifetime of your vehicle under normal vehicle operating conditions. The filter housing, bypass valve and call plate are CNC machined from Billet 6061 T6 Aluminum. The mechanical filtration is accomplished with a dual woven T 304 stainless steel micro-screen that provides excellent engine protection while providing a substantial increase in oil flow when compared to standard disposable oil filters. U.S. Pat. No. 7,413,889 and U.S. Pat. Pending
DIY Level

Easy

Installation Time

20-30 Minutes

Chat Now Chat Now