K&amp;N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1470 crankcase vent filter has a K&amp;N embossed rubber top with a rubber base. The 1-3/4 inch diameter rubber flange is designed to push on and clamp directly on to metal or plastic tubing where venting is needed. Constructed with a synthetic filter media it can be cleaned and reused repeatedly.  Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

62-1470 Vent Air Filter/ Breather

Vent Air Filter/ Breather

K&amp;N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The cone-shaped 62-1600RD-L crankcase vent filter has a K&amp;N embossed chrome top and chrome base. The flange clamps directly onto a 3/8 to 1/2 inch metal or plastic tubing where venting is needed. Constructed with a red colored synthetic media it can be cleaned and reused repeatedly.  Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

62-1600RD-L Vent Air Filter Multi Lingual

Vent Air Filter Multi Lingual

K&amp;N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1560 crankcase vent filter has a K&amp;N black rubber top and rubber base. The filter is 1-1/8 inches tall, 1-3/8 inches in outside diameter with a 3/4 inch flange which is designed to clamp directly on to metal or plastic tubing. This air filter is constructed with non-woven synthetic filter media so it can be cleaned and reused repeatedly.  Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

62-1560 Vent Air Filter/ Breather

K&amp;N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1030 crankcase vent filter has a K&amp;N embossed rubber top with a chrome-plated steel base. The 3/4 inch diameter zinc tube is designed to push in and clamp directly on to metal or plastic tubing where venting is needed. Constructed with a synthetic filter media it can be cleaned and reused repeatedly.  Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

62-1030 Vent Air Filter/ Breather

K&amp;N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1360 crankcase vent filter has a K&amp;N embossed chrome-plated steel top with a black rubber base. The 1 inch diameter zinc tube is designed to push in and clamp directly on to metal or plastic tubing where venting is needed. Constructed with a synthetic filter media it can be cleaned and reused repeatedly.  Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

62-1370 Vent Air Filter/ Breather

K&amp;N Tower Base Covered Crankcase Vent Filter with Multi-Hose Vents - High Performance Racing Style - Designed for big bore and full race VW and other like-size engines that require high levels of crankcase breathing filtration. Tower design saves blow-by oil while relieving crankcase pressure. High capacity filter element stops dirt from reaching oil supply when decelerating.  Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

62-1400 Vent Air Filter/ Breather

K&amp;N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1450 crankcase vent filter has a K&amp;N embossed rubber top with a rubber base. The 1-1/2 inch diameter rubber flange is designed to push on and clamp directly on to metal or plastic tubing where venting is needed. Constructed with a non-woven synthetic filter media it can be cleaned and reused and is covered under K&amp;N’s One Year Limited Warranty.  Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

62-1450 Vent Air Filter/ Breather

K&amp;N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-2470 crankcase vent filter has a K&amp;N embossed chrome top and chrome base. The 9/16 inch flange is designed to clamp on to the existing rubber breather grommets. Constructed with a synthetic filter media it can be cleaned and reused repeatedly. A pillow pack of K&amp;N air filter oil is included.  Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

62-2480 Vent Air Filter/ Breather

K&amp;N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The cone-shaped 62-1600BL crankcase vent filter has a K&amp;N embossed chrome top and chrome base. The flange clamps directly onto a 3/8 to 1/2 inch metal or plastic tubing where venting is needed. Constructed with a blue colored synthetic media it can be cleaned and reused repeatedly.  Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

62-1600BL Vent Air Filter/ Breather

3/8"-1/2"ID FLG X 2"OD B X 1-3/4"H X 1.5" TP CR

K&amp;N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1000 crankcase vent filter has a K&amp;N embossed rubber top with a steel base. The 3/8 inch diameter zinc tube is designed to push in and clamp directly on to metal or plastic tubing where venting is needed. Constructed with a synthetic filter media it can be cleaned and reused repeatedly.  Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

62-1000 Vent Air Filter/ Breather

K&amp;N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1110 crankcase vent filter has a chrome-plated steel base and top with a mounting stud. The 5/8 inch diameter zinc tube is designed to push in and clamp directly on to metal or plastic tubing where venting is needed. This air filter constructed with non-woven synthetic filter media it can be cleaned and reused repeatedly.  Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

62-1100 Vent Air Filter/ Breather

K&amp;N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-2470 crankcase vent filter has a K&amp;N embossed chrome top and chrome base. The 5/16 inch flange is designed to clamp on to metal or plastic tubing where venting is needed. This air filter is constructed with a non-woven synthetic filter media so it can be cleaned and reused repeatedly.  Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

62-2470 Vent Air Filter/ Breather

K&amp;N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1130 crankcase vent filter has a chrome-plated steel base and top with a mounting stud. The 1 inch diameter zinc tube is designed to push in and clamp directly on to metal or plastic tubing where venting is needed. Constructed with a cotton gauze filter media it can be cleaned and reused repeatedly. Comes with a 14.79 milliliter pillow-pack of air filter oil.  Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

62-1130 Vent Air Filter/ Breather

K&amp;N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1120 crankcase vent filter has a chrome-plated steel base and top with a mounting stud. The 3/4 inch diameter zinc tube is designed to push in and clamp directly on to metal or plastic tubing where venting is needed. Constructed with a cotton gauze filter media it can be cleaned and reused repeatedly. Comes with a 14.79 milliliter pillow-pack of air filter oil.  Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

62-1120 Vent Air Filter/ Breather

K&amp;N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1020 crankcase vent filter has a K&amp;N embossed rubber top with a chrome-plated steel base. The 5/8 inch diameter zinc tube is designed to push in and clamp directly on to metal or plastic tubing where venting is needed. Constructed with a synthetic filter media it can be cleaned and reused repeatedly.  Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

62-1020 Vent Air Filter/ Breather

K&amp;N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1330 crankcase vent filter has a K&amp;N embossed chrome-plated steel top with a black rubber base. The 1/2 inch diameter zinc tube is designed to push in and clamp directly on to metal or plastic tubing where venting is needed. Constructed with a synthetic filter media it can be cleaned and reused repeatedly. Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

62-1330 Vent Air Filter/ Breather

K&amp;N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1550 crankcase vent filter has a K&amp;N black rubber top and base. The 1 inch diameter zinc tube is designed to push in and clamp directly on to rubber or plastic tubing where venting is needed. Constructed with a cotton filter media it can be cleaned and reused repeatedly.  Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

62-1550 SPECIAL ORDER Vent Fltr/ Breather

SPECIAL ORDER Vent Fltr/ Breather

K&amp;N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1495 crankcase vent filter has a K&amp;N embossed chrome top with a rubber base. This filter is designed to screw directly into threaded Ford valve covers. This air filter is constructed with non-woven synthetic filter media so it can be cleaned and reused repeatedly.  Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

62-1495 Vent Air Filter/ Breather

K&amp;N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The 62-1220 crankcase vent filter has a K&amp;N embossed chrome-plated steel top with a black rubber base. The filter is 2-1/8 inches tall, 2 inches in outside diameter with a 9/16 inch flange which is designed to push on to the existing rubber breather grommets. Constructed with a cotton filter media it can be cleaned and reused repeatedly. A 14.79 milliliter pillow-pack of air filter oil included.  Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

62-1230 SPECIAL ORDER Vent Fltr/ Breather

1-1/8" FLG-OD, 9/16" FLG ID, 2"OD, 2-1/8"H

K&amp;N crankcase vent filters are perfect for racing applications, vintage cars or individuals who want to add some aesthetics to their classic carbureted engine. The cone-shaped 62-1600RD crankcase vent filter has a K&amp;N embossed chrome top and chrome base. The flange clamps directly onto a 3/8 to 1/2 inch metal or plastic tubing where venting is needed. Constructed with a red colored synthetic media it can be cleaned and reused repeatedly.  Note: Legal in California only for racing vehicles which may never be used, registered, or licensed for use upon a highway. See knfilters.com for CARB status on each part for a specific vehicle.

62-1600RD Vent Air Filter/ Breather

3/8"-1/2"ID FLG X 2"OD B X 1.5"T X 1-3/4"H, CR

Crankcase Breather Element