K&N 57-3025-1 Air Intake

57 Series FIPK / Performance Air Intake System
Rating Star 1 Rating Star 2 Rating Star 3 Rating Star 4 Rating Star 5     3 Customer Reviews
$338.99 USD
In Stock & Ready to Ship!   Free Ground Shipping!

Product Overview

  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Easy to install, usually in 90 minutes or less
  • Free-flowing high density polyethylene tube
  • Replaces entire factory air intake system
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty
The K&N 57-3025-1 Air Intake fits some Chevrolet S10 Pickup, and GMC Sonoma models. See vehicle applications link for details.
The K&N 57-3025-1 FIPK air intake system replaces your vehicle’s restrictive factory air filter and air intake housing. K&N intakes are designed to dramatically reduce intake restriction as they smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 57-3025-1 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. . Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory air temperature sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using the existing factory mounting points and requires commonly available tools to do the job. K&N 57 Series FIPK's are street legal in all 50 US states and come with K&N's Million Mile Limited Warranty.

[More Information on K&N FIPK Air Intake Systems]
Estimated Horsepower Gain6.73 HP @ 4700 RPM
Replacement FilterRC-4650
Air Filter ColorRed
Air Filter MaterialCotton Gauze
Air Filter Outlet ShapeRound
Clamps Included4
Clamp MaterialStainless Steel
Clamp StyleRegular
CARB EO NumberD-269-25
Couplers Included2
TypeGen II
Product Style57 Series FIPK
Air Filter Height6 in (152 mm)
Intake Pipe Color / FinishBlack
Intake Pipe MaterialHigh-Density Polyethylene
Street Legal In All US StatesYes
TUV Approved (Europe)No
Weight10.4 lb (4.7 kg)
Air Filter Large End Diameter5 in (127 mm)
Product Box Height12.5 in (318 mm)
Product Box Length18.25 in (464 mm)
Product Box Width18.25 in (464 mm)
Mounting Hardware IncludedYes
Warranty1,000,000 Miles/10 Year
Horsepower gains based on similar vehicle dynamometer test. Results will vary.
WARNING: Cancer and reproductive

K&N 57-3025-1 Air Intake Product Reviews

Friday, December 11, 2015 - Part 57-3025-1
Equipment very good. Everything that I expected to be.

Pedro O Sola
Sunrise, Florida
Friday, October 31, 2014 - Part 57-3025-1
I just installed your cold air intake on my 2000 S10 2.2L automatic, along with a Magnaflow catback exhaust. As you probably know, if you ran the 1/4 mile with this truck you'd have to clock it with a calender! Red light response was an instant improvement. I haven't taken it out on the expressway yet, but from what I've heard performance and mpg should be improved. Not to mention the extra room under the hood. Why couldn't GM install something like this instead of that Rube Goldberg inspired monstrosity from the factory? Installation was easy but the instruction sheet could be clearer. All in all, great product! Thanks.

Shepperd November
Ocala, Florida
Saturday, May 17, 2014 - Part 57-3025-1
I purchased my 2000 Chevy S10 used when I was in high school in 2003. Since at the time I had no major commitments with my extra income from my part time job I did what most guys my age were doing. Tricking out my truck! I had my truck for a couple of months before I purchased the K&N FIPK and was not satisfied with its performance. The only reason I got the four cylinder was because I knew it would be good on fuel back and forth to work and school. I started. looking into performance parts for it because I wanted more from my truck. That's when I came across the K&N FIPK. I managed to save a couple of pay checks and headed strait to the local auto store. I had pre ordered it a few days before so all I had to do was pick it up. I left the store and went to my girlfriend at the time cousin's house and started the install. It was pretty simple once we got the factory mess out of there. We had it in and started the truck and I was very impressed with the sound alone! I got in and took a short drive and never looked back. Now 11 years later my girlfriend at the time now my wife, three boys, and a mini van later and I'm installing a K&N air filter in my van! (No FIPK available for my van yet) I still have the truck and it's still running strong and have made some other modifications to the performance but now it mostly sits. I get in every now and again and still smile every time I step on the pedal! Thank you for a great, long lasting product!