Scion tC Owners Add 7.58 HP with Emissions Friendly K&N Air Intake System

The Scion tC is considered Toyota's successor to the Celica and is designed to appeal to the Generation Y market. It is also used for the Toyota Pro/Celebrity Race held during the Long Beach Grand Prix.

Air Intake for 2005 and 2006 Scion tC
Air Intake for 2005 and 2006 Scion tC

K&N Engineering's E-3038
Air Filter for 2005 and 2006 Scion tC Air Intake 69-8608TFK

K&N Engineering released a new Air Intake (69-8608TFK) in flat black for the 2005 and 2006 Scion tC 2.4 liter engine. K&N selected a few vehicles from Toyota that had hydrocarbon trap filters in the airboxes and worked with CARB's criteria to design emissions friendly air intakes. "This Typhoon Air Intake System is equipped with a hydrocarbon filter in the air box," said K&N Project Technician Nestor Cabrera. "Our Typhoon Air Intake System uses the factory upper air box with the mass air flow sensor. This allows the consumer to retain the CARB mandated emission device. Other additions include a special high flow K&N Air Filter (E-3038) and heat shield."

Power Gain Chart for Scion tC with K&N Air Intake
Power Gain Chart for Scion tC with K&N Air Intake
The high flow K&N Air Filter is mated to the factory upper air box by an exclusive K&N designed cage. The air intake heat shield isolates the air filter from the engine compartment and helps to funnel cooler outside air into the air filter. The CARB mandated hydrocarbon filter isolates evaporative emissions within the intake track. The E-3038 air filter is one of the first of its kind from K&N. It has a unique trapezoidal shape that was made specifically for this application.

K&N previously released air intakes for the 2005 & 2006 models with the traditional cold-air design. Performance of the 69-8608TFK is improved slightly over the K&N original air intake systems, 69-8607TB and 69-8607TS."

K&N dynamometer test show a 7.58 horsepower gain @ 5022 RPM for this intake system (69-8608TFK). "The horsepower and torque gains are exceptional for an engine of this size," said Cabrera. "The vehicle design played a major roll in the development of this Typhoon Air Intake. We took special care to ensure that the K&N Intake System followed the vehicle lines and did not obstruct or rub against other parts in the engine compartment."

There is a thorough development procedure which requires the use of multiple vehicles at K&N. "This helps give us confidence in our horsepower numbers," said Cabrera. "Our Typhoon Air Intake Systems go through a lot testing before being finalized for production."

It takes less than 90 minutes to install most K&N Air Intakes with common tools. K&N Typhoon Air Intake Systems are designed to improve engine performance along with under the hood visual appeal.

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.


Chat Now Chat Now