By Vehicle
By Vin
Photo uploaded
By Dimension

K&N Introduces Typhoon® Intake Systems For The Infiniti® G35 Coupe And Sedan

RIVERSIDE, CA – Like their Nissan® 350Z sibling, Infiniti® G35s turn heads every time they're out of their garages. Now K&N Engineering snaps G35 owners' heads farther back into the cars' headrests with its new Typhoon® intake systems. Dyno-testing on K&N's in-house Dynojet 248 revealed average drive-wheel gains of 9 HP for the G35 coupe Typhoon® (Part # 69-7080-1TS) and 4-5 HP for the sedan system (Part # 69-7081-1TS).

Although configured differently, both G35 kits combine aluminum intake tubing with a K&N FilterCharger® filter. Mandrel-bent 6061 aluminum provides maximum airflow, and this tubing is finished in the customer's choice of a polished surface and dual-stage powdercoated red, blue and silver. Air enters the Typhoon® systems through tapered round K&N FilterChargers®. These filters feature a single velocity-stack base, a black urethane cap and a filtration area made of oil-impregnated cotton-gauze over epoxy-coated aluminum wire mesh. FilterChargers® can be cleaned and re-oiled repeatedly with a K&N cleaning kit (sold separately). K&N Typhoon hose couplings are high-quality, multi-ply DuPont® Nomex®-reinforced silicone to withstand heat and vibration. All mounting hardware is stainless steel, including the barrel clamps that secure the silicone hose.

The G35 sedan Typhoon® is a short-ram style system that attaches to the engine's mass air sensor. For the G35 coupe kit, K&N devised a complete cold air system that draws air from behind the front fascia. This kit's intake tubing includes an aluminum mass-air sensor adapter that's completely TIG-welded. Because the filter is positioned low in the engine compartment, the G35 coupe Typhoon® includes a DryCharger® wrap for protection from small amounts of water and debris. This silicon-impregnated vinyl material repels water to keep it from entering the intake tract. In extremely wet conditions, the G35 coupe Typhoon® kit can easily be converted from the cold-air configuration to a short-ram style by mounting the filter directly to the inlet tube.

For additional information, please contact K&N Engineering, Inc., P.O. Box 1329, Riverside, CA 92502-1329, (800) 213-4182 for a dealer near you, (800) 858-3333 for technical service/questions, (951) 826-4001 Fax, e-mail [email protected] or visit

# # K&N # #


We have detected that you are using an outdated browser that will not allow you to access certain features of our website. We strongly recommend installing an updated browser, such as Google Chrome, for an improved browsing experience.