27+ Lb.-Ft. Torque* for 2015-2016 Chevy Colorado & GMC Canyon V6

2015 Chevy Colorado V6

If you’re looking for an awesome power upgrade for your truck, check out the new 57-3088 cold air intake, a new 50-State legal intake option engineered specifically for 2015-2016 Chevy Colorado and GMC Canyon 3.6L V6 models. The K&N® 57-3088 high-density polyethylene (HDPE) intake system offers an estimated power increase of 19.41-horsepower and 27.72 lb./ft. of torque*, exceptional engine protection, and improved engine sound on acceleration.

“Great kit, I've put some other brands on other vehicles and they just don't fit as good as the K&N's do.” – James from Minnesota [Part No. 57-1532]

WHY CHOOSE A K&N PERFORMANCE AIR INTAKE SYSTEM?

The 57-3088 is designed to help provide a smooth, low-restriction path for airflow to the engine. Your engine needs oxygen to create power; the cylinders in your vehicle’s engine need to have air to create the explosion that produces horsepower and torque. Allowing a higher volume of air into the cylinders allows the engine to burn fuel more efficiently during combustion—providing an increase in power.

“It went in just like it was made to fit. Had no problem installing it.” – Dan from Oregon [Part No. 57-1542]

57-3088 cold air intake system

HDPE INTAKE TUBE INCREASES AIRFLOW

The 57-3088 intake system features a free-flowing, high-density polyethylene intake tube, which is engineered to provide a smooth path for airflow and a higher volume of air to the engine. The 57-3088 also incorporates a steel heat shield, which helps protect the air filter and intake air from high temperatures within the engine bay.

“Great fit and notice horsepower improvement.” – Larry from Washington [Part No. 57-3034]

WHAT ARE THE BENEFITS OF HIGH-DENSITY POLYETHYLENE (HDPE) INTAKE TUBES?

High-density polyethylene (HDPE) has a very high strength-to-density ratio, as well as the ability to withstand extremely high temperatures—making it an excellent choice for the environment in the engine bay. HDPE can also be molded into custom shapes, allowing it to be adapted for specialized tubing designs.

IMPROVE ENGINE SOUND

Factory intake systems often feature intake tubing with tight bends, baffles, and other obstacles that can slow airflow and muffle engine noise. K&N intake systems are designed to give your engine a more satisfying growl on acceleration, but return to quiet once at speed.

HIGH-FLOW AIR FILTER™ OFFERS EXCEPTIONAL PROTECTION

The High-Flow Air Filter™ included in the 57-3088 intake kit is oversized with a conical shape, providing a greater surface area and allowing for a service interval of up to 100,000 miles between cleanings (under normal highway driving conditions). High-Flow Air Filters feature an oiled, layered design—providing up to 50% more airflow than a traditional paper filter. When your filter does need to be cleaned, you can use the K&N Recharger® Kit (99-5000 or 99-5050) to quickly and easily restore your filter’s performance. Each K&N intake (and filter!) is designed to last for the life of your vehicle.

INSTALLATION

The K&N 57-3088 intake system is engineered to incorporate factory mounting points and the factory mass air sensor. Installation can typically be completed in 90 minutes or less, and requires only simple hand tools. Detailed instructions are included in your kit.

Engineered to fit:

  • 2016 GMC Canyon 3.6L V6 Fuel Injection
  • 2016 Chevrolet Colorado 3.6L V6 Fuel Injection
  • 2015 GMC Canyon 3.6L V6 Fuel Injection
  • 2015 Chevrolet Colorado 3.6L V6 Fuel Injection

 

WARRANTY

Each intake system comes with a 10-Year/Million Mile Limited Warranty. Furthermore, using a K&N replacement air intake system will not void your factory warranty; in the U.S., manufacturers must provide evidence that an aftermarket part is the cause of a necessary repair in order to void or deny warranty coverage. The Consumer Products Warranty Act of 1975 (also known as the Magnuson-Moss Warranty Act) protects consumers’ rights to their warranty coverage.

DYNAMOMETER RESULTS

K&N performance air intake systems come with a horsepower guarantee. During dynamometer testing, the 57-3088 provided an estimated power increase of 19.41-horsepower and 27.72 lb./ft. of torque*. Follow this link to view the complete dynamometer chart.

“Love it, was super easy to install and makes big difference around the 3-4 thousand range.” – Shawn from Canada [Part No. 57-2575]

Visit this page to purchase the 57-3088 cold air intake system, or visit the vehicle search page to explore air intake system options for your vehicle. Join the millions of customers who trust K&N to help them boost performance and protection in their vehicles!

Legal in all 50 states.

 

*Horsepower gains vary among products and applications, but each K&N performance air intake system is designed to increase airflow efficiency for specific vehicles and their engines. Each kit undergoes significant testing to help ensure that the filter and intake tube are engineered to deliver large increases in airflow and horsepower. Please visit individual product pages to view horsepower estimates for your specific vehicle.

Share:

Chat Now Chat Now