Air filter rubber gasket for two or four barrel carburetors. This gasket fits around your air filter to help provide a tight seal.

85-9988 Air Filter Gasket

Air Filter Gasket

Gasket made from AN890 Armstrong paper gasket material. Gaskets are used between air filter base and mounting flange of carburetor. All gaskets are full sets and packed on display card.

85-9783 Air Filter Gasket

85-9424 Air Filter Gasket

K&amp;N Plenums and adapters for the Weber DGV carburetor allow for smooth airflow into your engine.

85-8927 Universal Plenum

Universal Plenum

85-8921 Universal Plenum

Spring clip clamps for K&amp;N universal air box assemblies - K&amp;N spring clips create a positive seal between the filter, base and top. This package contains 6 black clips that are 3/4 inches wide and 4.45 inches long.

85-83897 Spring Clip

Spring Clip

K&amp;N Flow Control Clips and Replacement Filters are designed for added support around the outside of Flow Control System assemblies. Made of spring steel and black powder coated these Clip kits come in sets of four (4).

85-83896 Steel Spring Clip

Steel Spring Clip

Spring clip clamps for K&amp;N universal air box assemblies - K&amp;N spring clips create a positive seal between the filter, base and top. This package contains 4 black clips that are 3/4 inches wide and 4.45 inches long.

85-83895 Spring Clip

85-83894 Steel Spring Clip

Spring clip clamps for K&amp;N universal air box assemblies - K&amp;N spring clips create a positive seal between the filter, base and top. This package contains 6 clips that are 3/4 inches wide and 5.99 inches long.

85-83893 Spring Clip

85-83892 Steel Spring Clip

Spring clip clamps for K&amp;N universal air box assemblies - K&amp;N spring clips create a positive seal between the filter, base and top. This package contains 4 clips that are 3/4 inches wide and 5.99 inches long.

85-83891 Spring Clip

85-83890 Steel Spring Clip

Air filter hardware kits: bolts, washers or O-rings needed for specific installations packaged on attractive display cards.

85-8362 Nuts, Bolts and Washers

Nuts, Bolts and Washers

K&amp;N's flexible hose kit is used with the Orion Universal Air Intake System. It connects directly to the Orion intake housing using an included velocity stack to smoothen air flow.  The other end is then routed to where cooler air flow can be found.  The hose measures 70mm in diameter and 750 mm in length.  Two zip ties are also included for easy mounting.

85-7000 Orion Flexible Hose Kit

Orion Flexible Hose Kit

The K&amp;N 14 inch air filter top and base plates fit any round 14 inch K&amp;N high-flow air filter for boosting the performance in carbureted race cars, hot rods, muscle cars and pickup trucks. The plates are made from lightweight aluminum with a spun aluminum finish featuring K&amp;N logos embossed on the outer edge of the top plate. The base plate fits carburetors with a 5-1/8 inch air horn flange and drops the filter 1-1/2 inches below the carb flange. The drop base design helps to maximize air filter height while still clearing the hood in many custom applications. These K&amp;N 14" top and base plates will work with various heights of K&amp;N high-flow air filters such as the 2-5/16 inch tall air filter E-3740, 3 inch tall air filter E-1650, 4 inch tall air filter E-3750, 5 inch tall air filter E-3760, 6 inch tall air filter E-3770 and several other variations meant for drag racing or off-road racing use.

85-6851 Top & Base Plate

Top & Base Plate

K&amp;N 14 inch diameter air filter top plate for replacement or special application needs.

85-6842 Top Plate

Top Plate

The K&amp;N carbon fiber air filter top plate will securely seal the top of a 14 inch diameter air filter and add an impressive visual upgrade to the air cleaner in your engine compartment.  The K&amp;N logo is embossed on the top of this ultra-lightweight and durable carbon fiber lid.

85-6840 Top Plate, Carbon Fiber

Top Plate, Carbon Fiber

Mounting bracket assembly to securely support K&amp;N Universal Air Filters to your vehicle.

85-6004 Apollo Mounting Bracket

Apollo Mounting Bracket

K&amp;N's black rubber adapter hose allows a 70 mm connection to a K&amp;N Apollo Universal Air Intake's standard 70 mm flange.

Air Filter Set