|
TOWER BASE COVERED CRANKCASE VENT FILTER
WITH MULTI-HOSE VENTS
High Performance Racing Style
- Designed for big bore and full race VW and other like-size engines needing maximum crankcase breathing filtration. Tower design saves blow-by oil while relieving crankcase pressure. High capacity filter element stops dirt from reaching oil supply when decelerating. When installing, bottom fitting should connect to engine's lowest pressure point (such as a rocker cover). Top side fitting should connect to engine's highest pressure point (such as the crankcase).
Two Styles:
CAST ALUMINUM TOWER has a universal mount, internal oil baffles and three 3/8" NPT
outlets for braided hose fittings.
STEEL TOWER has a chrome finish and no inner baffles. Features an adjustable steel mounting bracket and three 1/2" vent tubes for use with rubber slip-on hose. |
 |
Tower
Tower Number of Cover Diameter Element Diameter
Replacement Complete
Style Dimensions Outlets
& Height & Height
Element Part # Assembly Part #
Cast Alum. 2 1/8"Dx 3 — 3/8" NPT
4"OD x 3 1/2"H 3 1/2" x 3 1/2"
RE-0280
62-1400
4 3/4"H
Chromed Steel 2"Dx4"H 3 —1/2" hose 4"OD x 3 1/2"H
3 1/2" x 3 1/2"
RE-0280
62-1210
|
FLAT BASE COVERED CRANKCASE VENT FILTERS
Remote Mount
Designed for stock VW and other small displacement racing engines. Remote mount allows use of 1/2" or 3/8" ID vent hoses. Comes with satin anodized aluminum cover 4" in diameter and
3 1/2" high. Element is removable for easy servicing. Mounting bracket included — universal type for bolt-on or weld-on. |
 |
Number
Of Cover Diameter Element
Diameter
Replacement Complete
Outlets
& Height & Height
Element Part # Assembly Part #
2 1/2" hoses 4"OD x 3 1/2"H 3 1/2" x 3 1/2"
E-3050
62-1180
3 1/2" hoses 4"OD x 3 1/2"H 3 1/2" x 3 1/2"
E-3050
62-1190
3 3/8" hoses 4"OD x 3 1/2"H 3 1/2" x 3 1/2"
E-3050
62-1200
|
RUBBER MOUNTING FLANGED COVERED AIR FILTERS
Ideal for air compressors, construction and farming equipment, fork lifts, stationary power plants, etc. Designed for round intake flanges. Easy to install. Rubber flange design grips securely. The flange can be stretched to fit in between sizes. Aluminum cover is anodized for durability. |
 |
RUBBER Mounting
BONNET
Element Diameter
Flange I.D.
Diameter & Height K&N
ELEMENT Part # ASSEMBLY Part #
1"
4" 3 1/2" x 3 1/2"
RE-0200
54-1010
1 1/4"
4" 3 1/2" x 3 1/2"
RE-0220
54-1020
1 1/2"
4" 3 1/2" x 3 1/2"
RE-0240
54-1030
1 3/4"
4" 3 1/2" x 3 1/2"
RE-0260
54-1040
2"
4" 3 1/2" x 3 1/2"
RE-0280
54-1050
2 1/2"
5" 5" x 2 3/4"
RE-0380
54-1110
|
PUSH-IN CRANKCASE VENT
FILTER
Universal “Push-In” filter for valve covers.
Not recommended to be used as the oil filler plug, as repeated removal will damage the filter.
|
|
FORD SCREW IN BREATHER
This filter is designed to screw directly into threaded Ford valve covers. Filter dimensions: 3"
O.D. Chrome top; 1-3/4" height; Flange dimension: 1-1/4"
O.D., 3/4" L |
|
|
|
|
Vent Filter Size
Part #
3"O.D.; 2-1/2"H; 1 1/4"
62-1516
hole
with shield
3"O.D.; 2-1/2"H; 1 1/4"
62-1490
hole
without shield
2"O.D.; 2-1/4"H; 1 1/4"
62-1485
hole
without shield
1 1/8" Flange
OD;
62-1230
9/16" Flange ID; 2" OD;
2 1/8" H
|
|
Description
Part #
Ford Screw In
Breather
62-1495 |
|
NYLON REINFORCED VALVE COVER ADAPTERS
WITH FILTER
Nylon reinforced adapter plus a 3" O.D. x 2-1/2" tall filter, with or without deflector shield. Universal mount, requires a 1-1/4" I.D. hole, and a 2" square, flat surface. Comes complete with mounting hardware.
|
|
NYLON REINFORCED
VALVE COVER ADAPTERS
Requires a 1-1/2" I.D. (flanged filter to be purchased separately)
|
|
|
|
|
Description
Part #
Without deflector
shield
85-1221
With deflector
shield
85-1222 |
|
Description
Part #
Screws into Ford valve covers
85-1200
Screws into late GM valve covers
85-1210
Universal mount
(see style 4 above)
85-1220 |
Copyright © 2012 K&N Engineering, Inc. All Rights Reserved.
|
