SEARCH BY VEHICLE


SS-7013 Image

Performance Products > Oil Filter; Billet


Your Price: USD $209.99





       

SS-7013
 
In Stock & Ready to Ship!
  Free Ground Shipping!


A K&N reusable oil filter by Pure Power will last the lifetime of your vehicle under normal vehicle operating conditions. The filter housing, bypass valve and call plate are CNC machined from Billet 6061 T6 Aluminum. The mechanical filtration is accomplished with a dual woven T 304 stainless steel micro-screen that provides excellent engine protection while providing a substantial increase in oil flow when compared to standard disposable oil filters. U.S. Pat. No. 7,413,889 and U.S. Pat. Pending
  • Lasts the lifetime of your vehicle under normal vehicle operating conditions
  • Stainless Steel Micro-Screen Filtration
  • Reusable Oil Filter
  • Billet Aluminum Housing
  • Embedded Neodymium Magnets

Product Specifications

Anti Drain Back ValveNo
Bypass ValveYes
Filter MaterialStainless Mesh
Gasket MaterialViton
Height2.75 in (70 mm)
Outside Diameter2.5 in (64 mm)
Product Box Height6 in (152 mm)
Product Box Length4 in (102 mm)
Product Box Width4 in (102 mm)
Product StyleOil Filters
PSI Relief ValveNone
Removal NutNo
StyleCartridge
Thread SpecificationN/A
Weight0.5 lb (0.2 kg)

Customer Feedback


I absolutely love my intake I have a 2013 Ford Fusion SE 1.6L, and I couldn't wait for this part to arrive. The instructions are very crisp and easy to read, and I had no issues with assembly. I have no experience working cars but had no issues installing the part myself. It is quite simple I removed the factory pipe and filter, after removing the inlet air temperature sensor and EVAP vent line connected to the pipe. Probably the most difficult part was installing the new rubber grommet into the pipe for the new inlet sensor, and ensuring you remove the correct bolt on the thermostat housing so you can attach the bracket for the new pipe. I left that bolt loose until the new pipe was fitted where I wanted it, then tightened the bracket. I took my time and installed it in just over an hour. I then took the car for a test drive on the interstate. The first thing you notice, (other than the unique sound) is the acceleration. With my old piping the car would accelerate sluggishly, even when the gas pedal was floored. Not anymore, acceleration is powerful and smooth. During cruise an increase of about 5-7 MPG was noticed. The MPG did take a slight hit when driving in the city, or anywhere with a lot of stopping and starting. This is a must have for any 1.6L Ecoboost owners
Evan, New Jersey
I got my 2014 Mazda 3 S 2.5 in April and immediately replaced the paper filter with a K&N filter. However I had been thinking of replacing the intake with a High Performance Intake unit. I checked with the Service Manager at my dealer to see if there would be any warranty issues. He said that it would not impact any warranty coverage (although he suggested that I could replace the K&N unit with the original air intake if there was a factory recall on the fuel system). I found this kit really easy to install. The photo instructions were well detailed and easy to follow. I was amazed at the length of the original factory unit. From the 5 inch slot opening it takes a 90 degree turn, goes down 20 inches into the fenderwell, does a 180 and goes back up another 20 inches to the bottom of the airbox. The K&N unit occupies the same space as the factory airbox and is a short 12 inch run to the engine. As I said it was an easy, follow the step/photo installation. The use of the factory air sensor meant there was no recalibration or special tuning required. I just started the engine, checked all of the fittings and clamps to be sure there was no leakage, shut the hood, took a short test drive and it was good to go. You can easily feel the performance increase, especially with the 2.5 liter engine's automatic in sport mode. My brother, who used to sell Mazdas, drove the car before the upgrade and after. He agreed that the performance increase was very noticeable. Plus we both found the very deep intake growl (most noticeable in the Sport mode) to be a blast. It can be intrusive, but isn't anywhere as noticeable when your driving in the normal mode, so this isn't an issue for me. I stopped at my dealer and 3 of the salesmen wanted to see and hear the KN Typhoon. They all loved it and they plan to talk to the Parts Manager about making the kit something that he offers rather than the current I can get one for you which is what he told me when I asked about K&N products. I wanted the kit right away so I checked availability at the O'Reilly Auto store's website (very big in Minnesota). They listed a K&N Typhoon kit. However when I checked with the K&N website the part number they had listed was shown by K&N as for the 2004-2012 Toyota Corolla. So if you want to get a Typhoon kit through your local dealer, be sure to go to the K&N site first to be sure that you get the correct part number. All in all I can highly recommend both the K&N Typhoon Performance kit and ordering directly from K&N. Both exceeded my expectations.
Art Beseman, Apple Valley, Minnesota
I bought this filter to see if I could increase my mileage. I was shocked at a 10% increase in MPG. My 2013 Accord V6 manual was getting 27-28 on the Hwy with the stock air cleaner. When I put in the K&N filter I am now getting 31-32 MPG. I once tried to drive real easy just to see how good I could get for mileage and once got 34.3 MPG. This car doesn't need any more power at almost 280 horse it's almost too much for front wheel drive, but it's fun when you want it. Highly recommend this product. Oh I even put a K&N filter in my wife's 2014 Mazda 6 and have seen similar results. Great filter. Again highly recommend.
Doug L., Coon Rapids, Minnesota