77-1563KP Image

K&N 77-1563KP 5.0 out of 5 stars 4 Customer Reviews
Intake Kits > Performance Intake Kit

 List Price: $484.92
Your Price: $266.99

You Save 44.9%

Find a Local K&N Dealer


In Stock & Ready to Ship!
 Free Ground Shipping!

The K&N 77-1563KP high-flow performance air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Jeep Wrangler and Dodge Durango models. The restrictive factory air filter and air intake housing on your vehicle are replaced by this K&N air intake system which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. The improved air flow allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more usable power and acceleration throughout your engine’s RPM range. The 77-1563KP air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive chrome-like finish that's made to last and it accommodates the factory inlet air temperature sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, pliers, ratchet set and some wrenches. Some K&N 77 series air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

[More Information on 77 Series Air Intakes]
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Free-flowing aluminum tube
  • Replaces entire factory air intake system
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Easy to install, usually in 90 minutes or less
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty
Available Information
Installation Instruction Sheet
77-1563KP Vehicle Applications
Dyno Chart - 2011 Jeep Grand Cherokee 5.7L, 15.01HP Increase
Video Installation Video
News Story - 2011 and 2012 Grand Cherokee & Durango Owners Gain Estimated 15 HP with K&N Air Intake

Part 77-1563KP Product Specifications
Product Style: 77 Series Kits
Estimated Horsepower Gain: 15.01 HP @ 4500 RPM
Replacement Filter: RF-1041
Air Filter Color: Red
Air Filter Outlet Shape: Round
Street Legal In All US States: No
Air Filter Height: 7.5 in (191 mm)
TUV Approved (Europe): No
Air Filter Material: Cotton Gauze
Clamps Included: 5
Clamp Material: Stainless Steel
Clamp Style: Regular
Couplers Included: 2
Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required
Intake Pipe Color / Finish: Polished
Intake Pipe Ports: All intake tube ports needed for the specified applications are included
Vacuum Tubing Included: No
California Restricted: Not legal for sale or use in California
Weight: 11 lb (5 kg)
Product Box Length: 22.25 in (565 mm)
Product Box Width: 14.25 in (362 mm)
Product Box Height: 12.5 in (318 mm)

Horsepower gains based on similar vehicle dynamometer test. Results will vary.

Product Reviews    See all reviews!  Review part 77-1563KP

 Purchased this through Amazon a couple months back and I don't regret it. Not only is it appealing to the eyes with the chrome finish but the power gain through just accelerating off stops is pretty noticeable. The power increase at 4000-4500 RPM is very noticeable. The truck literally feels like it pulls the power last second from this which is incredible enough with the Hemi these come with. On top of all of this, the intake made my baby purr, it actually sounds like a Hemi with the intake. I was kind of disappointed as to how silent the Hemi was on the Jeep but with the intake upgrade it's been enough to turn some heads when I'm going down the road. This'll make me happy enough until I can get an exhaust to add with it. 5 out of 5 and would totally recommend. I also did notice a boost in fuel economy, around a 2-4 mpg increase on the highway. Not substantial but hey, it's pretty nice for a 5.7 litre engine right?
Jaime R., Minneapolis
 I started purchasing K&N filters for our vehicles a few years ago as they provide better mileage and slight horsepower increase. I went ahead and installed the cold air intake on a Commuter car (06 Altima V6) we have and was instantly sold with the horsepower increase in the mid to high RPM range. We gained just over 2/mpg as well. So I went ahead and installed it on out 11 Jeep Grand Cherokee with the hemi and again extremely happy. We are lifetime users of these products. It's a no brainer that you should at the very least use their filters as the cars will breath better!
Jarred, Sacramento, California
 I have used K&N air filters (OEM replacement), but hesitated to go to the conversion kit due to not wanting an increase in noise. My wife wanted a travel trailer, but did not want a pickup. So we went with the Hemi in the Jeep GC. I gave the kit a try - mainly due to the power increase, but I was ready to buy the OEM replacement filter. The kit is well designed and simple to install. The look is classy. The noise is only noticed when full throttle is needed (?!), as with around town driving and normal acceleration you cannot tell that the kit is in. The polished metal intake tube is well manufactured, except I did have to clean up the threads so that the PVC nipple would thread smoothly. One note as to application and fitment, the nipple as supplied extended down so as it touched the upper radiator hose. I reduced the length to have at least 1 inch clearance. I will continue to order directly for my other filters. Thanks!
David Ueeck, Redmond, Oregon