69-2543TTK Image

K&N 69-2543TTK Be the first to review!
69 Series Typhoon Kits > Performance Intake Kit

 List Price: $539.43
Your Price: $297.99

You Save 44.8%

Find a Local K&N Dealer


       

69-2543TTK
 
In Stock & Ready to Ship!
 Free Ground Shipping!


The K&N 69-2543TTK Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Dodge Avenger models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-2543TTK air intake comes with a black rubber topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive black powder-coat finish that's made to last and it accommodates the factory air temperature sensor and a replacement silicone crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a screwdriver, pliers, ratchet set and a 10 millimeter wrench. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

[More Information on 69 Series Typhoon Air Intake Systems]
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Free-flowing aluminum tube
  • Easy to install, usually in 90 minutes or less
  • Filter lasts up to 100,000 miles before service is required
  • Replaces entire factory air intake system
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty
Available Information
Installation Instruction Sheet
69-2543TTK Vehicle Applications
Dyno Chart - 2008 Dodge Avenger 3.5L- 12.31HP Increase
News Story - Add 12.31 Horsepower to 2008 to 2010 Dodge Avenger with K&N Air Intake System


Part 69-2543TTK Product Specifications
Product Style: 69 Series Typhoon Kits
Estimated Horsepower Gain: 12.31 HP @ 5493 RPM
Replacement Filter: RU-4730
Air Filter Color: Red
Air Filter Outlet Shape: Round
Street Legal In All US States: Yes
Air Filter Height: 6.5 in (165 mm)
TUV Approved (Europe): No
Air Filter Material: Cotton Gauze
Clamps Included: 3
Clamp Material: Stainless Steel
Clamp Style: Regular
Couplers Included: 1
System Type: Cold-Air Intake System
Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required
Intake Pipe Color / Finish: Black
Intake Pipe Ports: All intake tube ports needed for the specified applications are included
Vacuum Tubing Included: No
Air Filter Large End Diameter: 6 in (152 mm)
Weight: 10.5 lb (4.8 kg)
Product Box Length: 20.25 in (514 mm)
Product Box Width: 12.25 in (311 mm)
Product Box Height: 12.25 in (311 mm)


Horsepower gains based on similar vehicle dynamometer test. Results will vary.


Customer Feedback      Be the first to review part 69-2543TTK

Put an intake kit on my 4.7L Dodge Dakota many years ago.  Immediately liked what I heard and felt. Picked up some better mileage too.  My poor truck is long gone (RIP).  Just got a new setup for my 2008 3.5L Avenger and installing it this weekend.  I will let you know what I think after that.  
Mike Smelser, Phoenix, Arizona
Once again K&N delivers. I had replaced my factory air filter from Dodge on a 2013 Dodge Avenger R/T. Even though it was brand new, my vehicle had sluggish responses to acceleration prompts. Replaced it with ease with a K&N air filter. I took it for a test drive to compare and I could feel the massive difference in response. K&N is by far the best way to go when it comes to air filters. Plus, beating the price is nearly impossible for the quality and results that they deliver.
Dan, Washington
After years of using drop in K&N filters on multiple vehicles, I took the plunge on a performance intake kit for my 2013 Dodge Avenger. This car is a daily commuter with an anemic 2.4ltr naturally aspirated 4cyl. With the new performance intake kit, this air starved little engine can now breath like it needs to. The extra horsepower is apparent and my average gas mileage has increased by 4 mpg! I like that under normal driving conditions, the engine sound is unaltered from stock, no matter what speed. But push the throttle past 40%, the sound is fantastic! Installation was a breeze with everything fitting perfectly. The instructions were clear and easy to follow. It took me less than an hour from start to finish. Each part in the kit was made of high quality materials. I went with K&N for numerous reasons, reputation, experience in the industry, quality engineering. No 'check engine' light like I read so much about on lesser intakes. I would highly recommend K&N products.I also greatly appreciate that K&N makes a product for my vehicle, a vehicle that isn't a highly modifiable car, but greatly benefits from the added performance.
Sean Malone, Florida