69-2527TTR Image

K&N 69-2527TTR Be the first to review!
Intake Kits > Performance Intake Kit

 List Price: $980.72
Your Price: $540.99

You Save 44.8%

Find a Local K&N Dealer


       

69-2527TTR
 
In Stock & Ready to Ship!
 Free Ground Shipping!


The K&N 69-2527TTR Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Dodge Viper models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-2527TTR air intake comes with a pair of chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tubes into the engine’s throttle bodies for a guaranteed power gain. The intake tubes have an attractive red powder-coat finish that's made to last and it accommodates the factory mass air sensors and crank case vent hoses. The oversized cone shaped air filters come with water repellent DryCharger filter wraps to protect the filters from moisture. The air filters can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, pliers, a ratchet set and some wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

[More Information on Typhoon Air Intake Systems]
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Low restriction aluminum tubes
  • Easy to install, usually in 90 minutes or less
  • Filter lasts up to 100,000 miles before service is required
  • Replaces stock air intake system
  • Washable and reusable lifetime air filters
  • K&N Million Mile Limited Warranty
Available Information
Installation Instruction Sheet
69-2527TTR Vehicle Applications
Dyno Chart - 2008 Dodge Viper 8.4L V10 - 18.69HP
News Story - K&N Intake System Frees Up An Extra 18 Horsepower For Brutish American-Made Dodge Viper


Part 69-2527TTR Product Specifications
Product Style: 69 Series Typhoon Kits
Estimated Horsepower Gain: 18.69 HP @ 5300 RPM
Replacement Filter: RF-1048
Air Filter Color: Red
Air Filter Outlet Shape: Round
Street Legal In All US States: No
Air Filter Height: 6 in (152 mm)
TUV Approved (Europe): No
Air Filter Material: Cotton Gauze
Clamps Included: 9
Clamp Material: Stainless Steel
Clamp Style: Regular
Couplers Included: 4
System Type: Cold-Air Intake System
Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required
Intake Pipe Color / Finish: Red
Intake Pipe Ports: All intake tube ports needed for the specified applications are included
Vacuum Tubing Included: Yes
Air Filter Large End Diameter: 7.5 in (191 mm)
California Restricted: Not legal for sale or use in California
Weight: 17.4 lb (7.9 kg)
Product Box Length: 35.5 in (902 mm)
Product Box Width: 13.25 in (337 mm)
Product Box Height: 10.5 in (267 mm)


Horsepower gains based on similar vehicle dynamometer test. Results will vary.


Customer Feedback      Be the first to review part 69-2527TTR

I recently experienced a failure in a component of my 57-2541 Cold Air Kit after 100,000 trouble free, fuel saving miles. The problem was easily diagnosed and repaired by me at home. I contacted Elzabeth Taylor in Customer Service who was extremely helpful and very understanding in regards to my situation. She instantly shipped me a the part to replace the part that I field fixed in my driveway. She requested that I take some photos and send them to her so that Research and Developement could take a look and make any adjustments if necessary. I was delighted to comply and sent them back to her later that evening. I have K&N Cold Air Kits in my 1999 Ford F-150 and my son's 2013 Chevy Sonic 1.4 Turbo. I have an air filter in my wife's 2012 Dodge Caravan. Your products have served us well and delivered the performance figures that you quoted. Actually, I got better than quoted performance on my 1999 F-150. I averaged over 1.5 mpg increase after the intallation. I will be purchasing a Chevy Silverado with a Duramax Diesel engine very soon. I am anxious to see what we can do with K&N products at that time. Keep up the good work and the great customer focused service.
John R. Farill, Cookville, Tennessee
I received my K&N performance air filter for my 2011 Dodge Challenger and in just about an hour I had it installed and running. Installation was a snap with only one area to really watch what you're doing that's the air flow sensor. On GM and Ford products they are built a lot tougher than the Dodge type, but other than that all went quite well. I rated the product a five star because it really does enhance a vehicle's performance (plus it sounds cool). This is the fourth vehicle that I have installed this type of performance air filtering system on. I recommend this for any vehicle you drive, and if K&N doesn't make the type I bought they have replacement air filters for just about any vehicle out there.
Ken, Oregon
Installation of this filter was very easy. It fit very well and since my 2009 DODGE CHALLENGER is SUPERCHARGED it does allow my 5.7 Ltr Hemi to breath better but that may be just my positive thinking. It does however seem to respond just a tad quicker and I'll love the lifetime warranty and cleaning the filter every 50,000 miles even I know I'll probably check it more often and clean as needed. I'd recommend this K&N filter to anyone!
Wayne Boyd, Little Egg Harbor Township, New Jersey