$347.99 USD
MSRP $629.99 44.8% Off
Free Ground Shipping!
In Stock & Ready to Ship!
Find a Dealer

K&N 69-1020TS Air Intake

69 Series Typhoon Kits > Performance Intake Kit
Rating Star 1 Rating Star 2 Rating Star 3 Rating Star 4 Rating Star 5   4.8 out of 5 stars   6 Customer Reviews
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Low restriction aluminum tube
  • Easy to install, usually in 90 minutes or less
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Replaces stock air intake system
  • Washable and reusable lifetime air filter
  • K&N Million Mile Limited Warranty
The K&N 69-1020TS Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Honda Civic models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-1020TS air intake comes with a black rubber topped K&N high-flow air filter and a heat shield that installs into the previous air box space and connects to the fresh air duct. Air is directed from the air filter and through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has an attractive silver powder-coat finish that's made to last and it accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, pliers, a ratchet set and several wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.

[More Information on 69 Series Typhoon Air Intake Systems]

Product Specifications

Estimated Horsepower Gain3.17 HP @ 5424 RPM
Air Filter ColorRed
Air Filter Height4 in (102 mm)
Air Filter MaterialCotton Gauze
Air Filter Outlet ShapeRound
CARB EO NumberD-269-39
Clamp MaterialStainless Steel
Clamp StyleRegular
Clamps Included7
Couplers Included3
Intake Pipe Color / FinishSilver
Intake Pipe MaterialAluminum
Product Box Height12.5 in (318 mm)
Product Box Length20.25 in (514 mm)
Product Box Width12.25 in (311 mm)
Product Style69 Series Typhoon Kits
Replacement FilterRU-4600
Street Legal In All US StatesSee Application Link Above
System TypeCold-Air Intake System
TUV Approved (Europe)No
Weight10.8 lb (4.9 kg)
Horsepower gains based on similar vehicle dynamometer test. Results will vary.

K&N 69-1020TS Air Intake Product Reviews

Thursday, May 12, 2016 - Part 69-1020TS
This product is so good . My 2015 Honda Civic performs much better. I feel my engine is more powerful and its loud.

Monday, February 15, 2016 - Part 69-1020TS
Read and researched this short ram intake. Went with K&N because of the name and Rep. I like how it looks in the engine bay. Made the pedal softer during acceleration, most noticeable at about 3 to 5k rpm and pretty easy to install yourself. Had to cut the crank case tube a bit to have nice fit. I like the sound it makes. You can hear it breathe. Made my exhaust more noticeable (2.5 (brand name) no muff resonator with tip).

Monday, July 6, 2015 - Part 69-1020TS
Excellent product. Easy to install. Instructions are broken down Barney style. And if they aren't simple enough they even have YouTube videos up showing you step by step from taking the old air box out to putting this in. Only problem I had was it came with a plastic adaptor that broke off as soon as you tighten it. But I found the same adaptor at a local auto parts store and it was metal and it went right in. For only 50 cents. Immediately could tell the difference in horsepower. Like wow. And the sound it gave off makes it sound like an aftermarket blow off valve. Like a deep roar. It's a great part. And it's easy enough even for people who just know how to put gas in a car. Super simple. And the sound will blow your mind away. Highly recommended it. Also saves a lot of gas mileage too. Don't know why cars just don't come stock with this.

Clarksville Tennessee
Monday, June 8, 2015 - Part 69-1020TS
Product and performance is awesome. The only problem with the install was with the plastic fitting for vent hose. Instructions state to hand tight and then 2 turns, it snapped off at 1.25 turn. Other than that, everything is perfect, and definitely recommend this intake. Packaging, service, and shipping were all excellent.

Phoenix, Arizona
Monday, July 14, 2014 - Part 69-1020TS
Its been working great. I'm super happy with the performance.

Alberto Caceres
Thursday, October 31, 2013 - Part 69-1020TS
First off, I/we have your products on all of our vehicles. I got a kick out of my wife's comment on the performance of her Yukon. She called me and told me that something might be wrong with the engine, because of the sound it made when she accelerated. So I asked her if she might be able to explain. And I was thinking, maybe I might of left something loose or not installed correctly. So she explained that when she accelerated that the engine was making a loud BOOO sound and the vehicle seemed to accelerate must faster then before. That's when I advised her that I had installed your filter system on her Yukon.  She said WOW it sounds loud, however she really enjoys the extra power and pick up, love you Sonny!!
Now almost 2 years ago I purchased my 2011 Honda Civic and I called your company to purchase / research the possibilty of installing the filter system on my new car. I was told that it was not yet ready for purchase, in other words, R&D was in work / planning. However I was asked if I would like to be notified when it was available for the public. And of course I said yes and gave him my email address. Well time passed and I called again and was informed that it was still not available so I said ok. I was told that I would be able to purchase the filter now but not the kit, so I did. And I was satisfied for now. Then I was looking on Amazon trying to find a cold induction system and I saw that they had your kits available for my Honda. So I called your company to purchase one. However your notification system failed to notify me of the availably of the kit when it was available to the public. The filter was like $45.00 plus tax.

Sonny Hudson
Red Oak, Texas