57-9000 Image

57 Series FIPK > Performance Intake Kit

 List Price: $325.87
Your Price: $179.99

You Save 44.8%

Find a Local K&N Dealer


       

57-9000
 
In Stock & Ready to Ship!
 Free Ground Shipping!


The K&N 57-9000 FIPK air intake system replaces the restrictive factory air filter and air box in some Toyota Corolla models. K&N intakes are designed to dramatically reduce intake restriction and improve air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 57-9000 air intake comes with a chrome topped K&N high-flow air filter that installs onto the factory mass air sensor within the previous air box space. Air is directed through the air filter into the engine’s throttle body for a guaranteed power gain. The oversized cone-shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points while requiring commonly available tools to do the job. K&N 57 Series FIPK's are street legal in all 50 US states and come with K&N's Million Mile Limited Warranty.

[More Information on FIPK Air Intake Systems]
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Easy to install, usually in 90 minutes or less
  • Washable and reusable lifetime air filter
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Replaces entire factory air intake system
  • K&N Million Mile Limited Warranty
Available Information
Installation Instruction Sheet
57-9000 Vehicle Applications
Instructions Francaises - French


Part 57-9000 Product Specifications
Product Style: 57 Series FIPK
Replacement Filter: RF-1002
Air Filter Color: Red
Air Filter Outlet Shape: Not Flanged
Street Legal In All US States: Yes
Air Filter Height: 3.25 in (83 mm)
TUV Approved (Europe): No
Air Filter Material: Cotton Gauze
Clamps Included: 1
Clamp Material: Stainless Steel
Clamp Style: Regular
Type: Gen I
Mass Air Flow Sensor Adapter Included: Mass Air Flow Sensor Adapter Included When Required
Intake Pipe Color / Finish: None
Intake Pipe Ports: All intake tube ports needed for the specified applications are included
Vacuum Tubing Included: No
Weight: 3.8 lb (1.7 kg)
Product Box Length: 9.13 in (232 mm)
Product Box Width: 9.13 in (232 mm)
Product Box Height: 9.25 in (235 mm)



Customer Feedback      Be the first to review part 57-9000

I got my 2014 Mazda 3 S 2.5 in April and immediately replaced the paper filter with a K&N filter. However I had been thinking of replacing the intake with a High Performance Intake unit. I checked with the Service Manager at my dealer to see if there would be any warranty issues. He said that it would not impact any warranty coverage (although he suggested that I could replace the K&N unit with the original air intake if there was a factory recall on the fuel system). I found this kit really easy to install. The photo instructions were well detailed and easy to follow. I was amazed at the length of the original factory unit. From the 5 inch slot opening it takes a 90 degree turn, goes down 20 inches into the fenderwell, does a 180 and goes back up another 20 inches to the bottom of the airbox. The K&N unit occupies the same space as the factory airbox and is a short 12 inch run to the engine. As I said it was an easy, follow the step/photo installation. The use of the factory air sensor meant there was no recalibration or special tuning required. I just started the engine, checked all of the fittings and clamps to be sure there was no leakage, shut the hood, took a short test drive and it was good to go. You can easily feel the performance increase, especially with the 2.5 liter engine's automatic in sport mode. My brother, who used to sell Mazdas, drove the car before the upgrade and after. He agreed that the performance increase was very noticeable. Plus we both found the very deep intake growl (most noticeable in the Sport mode) to be a blast. It can be intrusive, but isn't anywhere as noticeable when your driving in the normal mode, so this isn't an issue for me. I stopped at my dealer and 3 of the salesmen wanted to see and hear the KN Typhoon. They all loved it and they plan to talk to the Parts Manager about making the kit something that he offers rather than the current I can get one for you which is what he told me when I asked about K&N products. I wanted the kit right away so I checked availability at the O'Reilly Auto store's website (very big in Minnesota). They listed a K&N Typhoon kit. However when I checked with the K&N website the part number they had listed was shown by K&N as for the 2004-2012 Toyota Corolla. So if you want to get a Typhoon kit through your local dealer, be sure to go to the K&N site first to be sure that you get the correct part number. All in all I can highly recommend both the K&N Typhoon Performance kit and ordering directly from K&N. Both exceeded my expectations.
Art Beseman, Apple Valley, Minnesota
I've used K&N filters on all my vehicles for the patst 15 years. I have never had a problem or defect with any of the ones I used. Custom 2001 for Lightning, 83 Ford Ranger 306 385 HP, 2001 Toyota Corolla Power Adders. I don't think there is anohter brand out there that meets up to the spec's and performance of K&N filters, I'm sold and will have have one on the next build I do.
Jon Thompson, Oregon
I bought this for my 1999 Toyota Corolla. It was a perfect fit and made my car run better and quieter than it has since I bought it. It's ready to go out of the box and was super easy.
Aric Castro, Modesto, California