57-0622 Image

57i Series Kits > Performance Intake Kit

 List Price: $261.22
Your Price: $143.99

You Save 44.9%

Find a Local K&N Dealer


       

57-0622
 
In Stock & Ready to Ship!
 Free Ground Shipping!


K&N 57i Series Induction Kits are specifically designed for each different vehicle and will free your car from the size restriction that comes with the factory air box. These economical kits can take a variety of different forms based on vehicle characteristics and available space under the hood. Each kit is designed to provide power throughout the RPM range. The extra surface area of these open-air air filters provide even more airflow at lower restriction than a K&N O/E replacement filter which is always limited to the size of the factory air box. The larger air filter also captures and holds more dirt increasing its service life before a cleaning is required (up to 100,000 miles). The filter is either directly attached to the engine carburetor or throttle body or indirectly through a tube assembly running from the filter to the engine. All adapters are made from high quality materials such as steel, aluminum, silicon or reinforced nylon to ensure long life. 57i Intakes are not legal for use in California and other US States adopting California emission standards.

[More Information on 57i Induction Systems]
  • Guaranteed to increase horsepower
  • Designed to improve throttle response and engine sound
  • Replaces entire factory air intake system
  • Not legal for highway use in states adopting California emission regulations
  • Washable and reusable lifetime air filter
  • Lasts up to 100,000 miles before service is required (depending on driving conditions)
  • Easy to install, usually in 90 minutes or less
  • K&N Million Mile Limited Warranty®


Product Specifications 
Air Filter Color:Red
Air Filter Height:8 in (203 mm)
Air Filter Large End Diameter:5.5 in (140 mm)
Air Filter Material:Cotton Gauze
Air Filter Outlet Shape:Not Flanged
California Restricted:Not legal for sale or use in California
Clamp Material:Steel
Clamp Style:Regular
Clamps Included:1
Intake Pipe Color / Finish:Black
Intake Pipe Ports:All intake tube ports needed for the specified applications are included
Mass Air Flow Sensor Adapter Included:Mass Air Flow Sensor Adapter Included When Required
Part Number:57-0622
Product Box Height:9 in (229 mm)
Product Box Length:9 in (229 mm)
Product Box Width:9 in (229 mm)
Product Style:57i Series International Kits
Replacement Filter:RF-1025
Street Legal In All US States:No
TUV Approved (Europe):No
Type:Gen I
Vacuum Tubing Included:No
Weight:2.6 lb (1.2 kg)


Customer Feedback      Be the first to review part 57-0622

I got my 2014 Mazda 3 S 2.5 in April and immediately replaced the paper filter with a K&N filter. However I had been thinking of replacing the intake with a High Performance Intake unit. I checked with the Service Manager at my dealer to see if there would be any warranty issues. He said that it would not impact any warranty coverage (although he suggested that I could replace the K&N unit with the original air intake if there was a factory recall on the fuel system). I found this kit really easy to install. The photo instructions were well detailed and easy to follow. I was amazed at the length of the original factory unit. From the 5 inch slot opening it takes a 90 degree turn, goes down 20 inches into the fenderwell, does a 180 and goes back up another 20 inches to the bottom of the airbox. The K&N unit occupies the same space as the factory airbox and is a short 12 inch run to the engine. As I said it was an easy, follow the step/photo installation. The use of the factory air sensor meant there was no recalibration or special tuning required. I just started the engine, checked all of the fittings and clamps to be sure there was no leakage, shut the hood, took a short test drive and it was good to go. You can easily feel the performance increase, especially with the 2.5 liter engine's automatic in sport mode. My brother, who used to sell Mazdas, drove the car before the upgrade and after. He agreed that the performance increase was very noticeable. Plus we both found the very deep intake growl (most noticeable in the Sport mode) to be a blast. It can be intrusive, but isn't anywhere as noticeable when your driving in the normal mode, so this isn't an issue for me. I stopped at my dealer and 3 of the salesmen wanted to see and hear the KN Typhoon. They all loved it and they plan to talk to the Parts Manager about making the kit something that he offers rather than the current I can get one for you which is what he told me when I asked about K&N products. I wanted the kit right away so I checked availability at the O'Reilly Auto store's website (very big in Minnesota). They listed a K&N Typhoon kit. However when I checked with the K&N website the part number they had listed was shown by K&N as for the 2004-2012 Toyota Corolla. So if you want to get a Typhoon kit through your local dealer, be sure to go to the K&N site first to be sure that you get the correct part number. All in all I can highly recommend both the K&N Typhoon Performance kit and ordering directly from K&N. Both exceeded my expectations.
Art Beseman, Apple Valley, Minnesota
Love this filter. That's all I use in my vehicles and motorcycles. This filter makes a huge difference in my Mazda Miata MX5.
Angel, Cocoa, Florida
We just received the first K&N filter designed for my wife's 2014 Buick Encore. I put it in the car and my wife has said she already feels better throttle response with it. This is the 6th K&N filter I have used. I have installed them in all my current and past vehicles (Honda Civic, Pontiac Vibe, Scion TC, Hyundai Santa Fe, and Mazda CX-5). I find the quality top notch, and the performance better than expected.
Mike Niemczura, Cleveland, Ohio