Nostalgia Air Filter Assemblies

These custom air cleaner assemblies from K&N are designed for use on nostalgia engines. They incorporate our famous K&N Air Filters and combine high air flow with great looks.  Available in 4 different styles.

Four Inch Chrome Top Open Sides

 

Round open style assemblies fit nearly all early model carburetors with 2-3/16" or 2-5/8" flange diameter. Assemblies are 4" in diameter and measure 3" from base to the top of the wing nut.

 
Description K&N P/N
Single Assembly 60-0400
3 Complete Assemblies 60-0403
Single Replacement Element for 60-0400 E-3120
 

Four Inch Chrome Louvered Chrome Bonnet

 
Louvered Bonnet assemblies have a 4" outside diameter base with a 2-5/8" flange and 2-3/16" flange adapter.  The 4-5/8" outside diameter Bonnet measures 3" total height (the total height is the minimum clearance required above the carburetor flange).
Description K&N P/N
Single Assembly 60-0500
3 Complete Assemblies 60-0503
 

Pontiac Tri-Power Air Cleaners - Chrome

 
Designed for Pontiac 389, 400, 421, and 428 engines with tri-power.  Some mounting flange sizes vary by model year.  Make sure to measure before ordering.
 
Description K&N P/N
Single Assembly - 2 5/8" 60-1331
Single Assembly - 3 1/16" 60-1340
3 Complete Assemblies - 2 5/8" 60-1333
One 2 5/8" + Two 3 1/16" Assemblies  60-1350
Single Replacement Element for all Assemblies E-3200
 

Four Inch Finned Aluminum Top Filters

 
Round one-piece filters are molded into the aluminum base and finned top and have an “as cast” finish that can be painted, polished or left as is. They fit carburetors with a 2 5/8” flange diameter and are held in one place with a setscrew. These filters are 4” in diameter and measure 2 3/4” in length from base of flange to top.
 
Description K&N P/N
Single Assembly 60-0410
3 Complete Assemblies 60-0413
 

These filters are legal ONLY for racing vehicles.  Not applicable, nor intended for use on emission controlled street or highway vehicles.