SEARCH BY VEHICLE

2014-2016 Honda CBR650F Air Filter Lasts Longer, Enhances Horsepower and Torque

       Printer Image
HONDA CBR650F Replacement Air Filter

The K&N HA-6414 replacement air filter comes pre-oiled, and is washable and reusable.

The K&N HA-6414 is specifically designed and manufactured for the Honda CB650F and CBR650F motorcycles. The CB650F includes a 649 cc 4-stroke, 4-cylinder engine and six speed transmission. The engine generates 86 bhp at 11,000 rpms and 46 lb-ft of torque at 8,000 rpms. Top speed is about 130 mph and it has a range of 160 miles with an estimated fuel economy of 45 mpg. Output is lower than the previously offered Honda Hornet and the bike is heavier because the frame is made from oval-section steel tubes, not aluminum.

The K&N HA-6414 is specifically designed and manufactured for the Honda CB650F and CBR650F motorcycles. The CB650F includes a 649 cc 4-stroke, 4-cylinder engine and six speed transmission. The engine generates 86 bhp at 11,000 rpms and 46 lb-ft of torque at 8,000 rpms. Top speed is about 130 mph and it has a range of 160 miles with an estimated fuel economy of 45 mpg. Output is lower than the previously offered Honda Hornet and the bike is heavier because the frame is made from oval-section steel tubes, not aluminum.

Designed to be slotted between the Honda entry level CBR500R and the supersport CBR600RR, the 2014 CBR650F Honda motorcycle is powered by a 650 cc inline-four engine and the 2015 and later CBR650F has a new 649 cc inline-four that produces a maximum output of 86-horsepower, 11,000 rpm, and 46-ft-lb of torque at 8,000 rpm.

To ensure a good center of gravity, the Japanese motorcycle and automobile manufacturer leans the engine cylinders forward 30°, an innovation first used on the Honda NM4. The angle gives air from the intake a more direct route through the air cleaner and into the intake ports. This boosts power because intake resistance is reduced and that helps improve power and fuel economy. The bike also features a 16-valve DOHC cylinder head with direct cam actuation and PGM-FI fuel injection with 32 mm throttle bodies.

Constructed to be small enough to fit further forward for better weight distribution, the engine is bolted to the diamond-shaped, twin-spar, steel frame with aluminum hangers and serves not only as the source of power, but also as the stressed member of the chassis. The chassis itself is stiff around the headstock and offers a little bit more flex at the spars.

Weighing about 454 pounds, the bike includes a seat that is 31.9-inches high and a 41 mm Showa fork provides the front suspension with 4.7-inches of travel. The rear suspension includes a single shock that permits 5 inches of travel and a seven-step adjustment for spring preload.

Twin-piston binders with dual, wave-type 320 mm discs stops the machine up front and a single-piston caliper working with a 240 mm disc stops it in the rear.

With the design of the bike offering a direct route of air through the air cleaner, it would be nice if the cleaner could provide additional boost to the bike’s capabilities.

The K&N HA-6414 replacement air filter does that. It is designed to offer better horsepower and torque. It can be used longer between cleanings because the pleated media offers a larger filtration surface.

The cotton media of the air filter has been treated with a specially formulated grade of filter oil that makes the cotton strands tacky so that they can catch and hold impurities before they get to the engine. The filter should be cleaned at intervals of 50,000 miles, depending on road conditions.

K&N also offers the air filter cleaning kit that renews the filter for another 50,000 miles of use. The cleaner is specifically formulated to restore the filter’s airflow efficiency so that it can perform like new. The cleaning process is very easy and can be done in seven easy steps in a little more than 90 minutes.

The company is so sure that the K&N HA-6414 air filter will perform as advertised, it backs it with a 10-year/million-mile limited warranty.

The K&N HA-6414 is precisely designed for these vehicle applications.

2016 HONDA CBR650F ABS 649 - All
2016 HONDA CBR650F 649 - All
2016 HONDA CB650F 649 - All
2015 HONDA CBR650F ABS 649 - All
2015 HONDA CBR650F 649 - All
2015 HONDA CB650F 649 - All
2014 HONDA CBR650F ABS 649 - All
2014 HONDA CBR650F 649 - All
2014 HONDA CB650F 649 – All

To find the proper air filter for your motorcycle, car, truck, or SUV, check out the K&N search by vehicle tool. K&N is always developing new air filters. If we do not have a filter for your vehicle at this time, please ask us to make one using the online product request.


K&N PRODUCT SEARCH     WHERE TO BUY K&N


Horizontal Advertisement


Did you like this story? Select 1 to 5 stars to rate it.

K&N Engineering in Riverside California is the world's leading manufacturer of washable performance air filters and air intake systems. K&N invented the reusable high flow cotton air filter in 1969 and has been perfecting the technology ever since. K&N is a world class filtration company selling air filters, oil filters, and intakes in over 50 countries. K&N sells over 5,000 products designed for cars, trucks, motorcycles, engines, and industrial applications. From their Million Mile Warranty to their Consumer Protection Pledge, K&N stands behind their products and their consumers 100%. The distinctive K&N logo represents performance from one of the original performance companies. For more information, visit knfilters.com.