SEARCH BY VEHICLE

2015 and 2016 Ford Mustang Ecoboost Owners Looking For a Boost Can Do So with a K&N Air Intake

       Printer Image
K&N Aircharger air intake system for the 2015-2016 Ford Mustang 2.3L Ecoboost

K&N Aircharger air intake system for the 2015-2016 Ford Mustang 2.3L Ecoboost eliminates restrictive factory parts for more HP and torque

Not since the Fox Body Ford Mustang SVO has Ford offered a turbocharged inline-four cylinder engine in its legendary Pony Car. Contrary to most auto makers’ engine line ups, due to an increase in horsepower, torque, and fuel economy, the 2015 and 2016 Ford Mustang 2.3L EcoBoost four cylinder engine is an upgrade over the standard 300 horsepower V6. Ford engineers managed to squeeze an impressive 310 horsepower and 320 lb-ft of torque from the 2.3L EcoBoost engine while also earning an EPA estimated 31 highway MPG for the 2015 and 2016 Ford Mustang. Despite the already impressive power numbers of the 2015 and 2016 Ford Mustang EcoBoost, owners searching for an extra boost in horsepower, torque, and acceleration can easily do so with the installation of a K&N Aircharger air intake system 63-2589.

All 2015 Ford Mustangs feature new independent rear suspension

The Ford Mustang has always had a solid live axle rear suspension, however all 2015 and 2016 Ford Mustangs feature new independent rear suspension

Typically, the factory air intake tubing, stock air filter box, and disposable air filter is a significant point of restriction in modern fuel injected cars or trucks, especially those with turbochargers. Because of this fact, K&N has developed an Aircharger air intake system for the 2015 and 2016 Ford Mustang 2.3L Ecoboost to eliminate restrictive factory components by replacing them with a roto-molded HDPE air intake tube coupled to an open element K&N reusable air filter for superior airflow and superior performance. Additionally, the K&N reusable air filter RC-2960 included with the 2015 and 2016 Ford Mustang 2.3L EcoBoost intake is protected by an application specific air filter heat shield to help keep inlet air temperatures (IAT) within factory tolerances.

K&N air filter, RC-2960, included with the K&N 2015-2016 Ford Mustang 2.3L EcoBoost air intake

The K&N reusable air filter, number RC-2960, included with the K&N 2015-2016 Ford Mustang 2.3L EcoBoost air intake is protected by an application specific air filter heat shield

The K&N 2015 to 2016 Ford Mustang 2.3L Ecoboost air intake system 63-2589 is an easy to install performance upgrade that can be completed in about 90 minutes or less using basic hand tools, and by following K&N’s simple step-by-step instructions. It maintains all necessary factory connections and does not require any additional modifications be made to the vehicle for increased performance. In fact, when installed on an otherwise stock 2015 Ford Mustang 2.3L Ecoboost, K&N air intake 63-2589 was shown to make impressive performance gains in horsepower and torque throughout the entire RPM range. On the dyno, K&N observed an estimated peak horsepower gain of 15.72 HP at a very usable 4224 rpm. Even more impressive was the estimated additional 19.85 pound-feet of torque at a low 3,778 rpm. Increased power will require the engine to expend less energy to cruise down the highway, improve acceleration, and allow the Ecoboost engine’s turbocharger to spool up faster.

K&N managed to squeeze out an estimated additional 15 HP for the 2015 Mustang 2.3L EcoBoost engine

K&N managed to squeeze out an estimated additional 15 HP and 19 lb-ft of torque from the already fast 310 horsepower and 320 lb-ft torque 2015 Mustang 2.3L EcoBoost engine

K&N backs its air filters and air intake systems with a 10-year/million mile limited warranty so owners can rest assured that their intake system can stand up to the most demanding drivers. Whether 2015 oro 2016 Ford Mustang Ecoboost owners use their pony car as a fun to drive, fuel efficient daily driver, or for taking on V8 powered cars on the track, the K&N 63-2589 Aircharger Air Intake system will provide increased performance with better engine sound for years to come.

Performance air intake system 63-2589 is guaranteed to increase horsepower and torque on the Ford Mustang models listed below:

2016 Ford Mustang 2.3L
2015 Ford Mustang 2.3L

Find additional products for your 2015 or 2016 Ford Mustang, such as Ford Mustang Air Intakes, or another vehicle, using the search by vehicle tool on KNFilters.com. To find a dealer near you, please use the K&N Dealer Search function.

 
K&N PRODUCT SEARCH K&N Filters Logo WHERE TO BUY K&N



Horizontal Advertisement


Did you like this story? Select 1 to 5 stars to rate it.

K&N Engineering in Riverside California is the world's leading manufacturer of washable performance air filters and air intake systems. K&N invented the reusable high flow cotton air filter in 1969 and has been perfecting the technology ever since. K&N is a world class filtration company selling air filters, oil filters, and intakes in over 30 countries. K&N sells over 5,000 products designed for cars, trucks, motorcycles, engines, and industrial applications. From their Million Mile Warranty to their Consumer Protection Pledge, K&N stands behind their products and their consumers 100%. The distinctive K&N logo represents performance from one of the original performance companies. For more information, visit knfilters.com.