K&N Air Intake under the hood of select Chevy, GMC, Cadillac SUVs and trucks
The full-size pickup truck market isn’t just about horsepower and towing capabilities anymore. To be competitive, manufacturers must offer fuel-efficiency as well as power, refined interiors with modern-day technology, and wrap it all up in a platform that performs well on-road as well as off-road. It has to be the complete package. Some might think this isn’t doable, but General Motors has come out swinging and is fighting to win with the fully-redesigned 2014 Chevrolet Silverado, 2015 Tahoe, 2015 Suburban, and their GMC brethren the Sierra, Yukon and Yukon XL. These trucks hit all the checkboxes of power, fuel efficiency, towing capability, refinement, and technology. However, installing the K&N 63-3082 Aircharger performance air intake system can take these trucks to the next level and further distance them from the competition.
K&N Air Intake System for select 2014 and 2015 Chevy, GMC, Cadillac SUVs and trucks
The 63-3082 performance air intake system is expert-engineered and guaranteed to increase horsepower and torque. It replaces the restrictive factory system with a free-flowing, high-density polyethylene air intake tube to help minimize restriction, straighten, and increase airflow to the engine. More air means more usable power throughout the engine’s RPM range. K&N’s RF-1041 conical air filter is fitted to the inlet of the system to provide excellent airflow rates as well as outstanding filtration efficiency. The air filter is washable and reusable and can go up to 100,000 miles between cleanings, depending on driving conditions. K&N 63-3082 incorporates a heat shield which helps to allow cooler air to enter the engine.
Dyno Chart for select 2014 and 2015 Chevy, GMC, Cadillac SUVs and trucks K&N Air Intake 63-3082
Dyno Chart for K&N 2015 Chevy Tahoe Air Intake 63-3082
Excellent design won’t get you very far in the truck world if the design doesn’t produce a measureable result. The K&N 63-3082 performance air intake system puts down impressive performance gains in horsepower and torque. On the dyno, when installed on a 2014 Chevrolet Silverado 5.3 liter V8 truck, the 63-3082 performance air intake system produced an estimated additional 10.6 horsepower at 5341 rpm and 8.4 pound-feet of torque at 4391 rpm. When installed on a 2015 Chevrolet Tahoe 5.3 liter V8, the 63-3082 performance air intake system produced an estimated additional 15.3 horsepower at 5341 rpm and 21.2 pound-feet of torque at 4390 rpm.
The 63-3082 performance air intake system is an easy to install performance upgrade that can be installed in about 90 minutes or less using basic hand tools, and by following K&N’s simple step-by-step instructions. It maintains all necessary factory connections and does not require any additional modifications be made to the vehicle. K&N backs the 63-3082 with the famous K&N Million Mile Limited Warranty so owners can rest assured that their intake system can stand up to tough conditions.
Whether the 2014 or 2015 Chevy or GMC is used as a reliable daily driver or a dedicated workhorse, the K&N 63-3082 Aircharger air intake system will provide durable and reliable increased performance for years to come.
Performance air intake system 63-3082 is guaranteed to increase horsepower and torque on the Chevrolet and GMC models listed below:
2015 GMC Yukon XL 5.3L V8
2015 GMC Yukon Denali XL 6.2L V8
2015 GMC Yukon Denali 6.2L V8
2015 GMC Yukon 5.3L V8
2015 GMC Sierra 1500 6.2L V8
2015 GMC Sierra 1500 5.3L V8
2015 Chevrolet Tahoe 5.3L V8
2015 Chevrolet Suburban 5.3L V8
2015 Chevrolet Silverado 1500 6.2L V8
2015 Chevrolet Silverado 1500 5.3L V8
2015 Cadillac Escalade 6.2L V8
2014 GMC Sierra 1500 6.2L V8
2014 GMC Sierra 1500 5.3L V8
2014 Chevrolet Silverado 1500 6.2L V8
2014 Chevrolet Silverado 1500 5.3L V8
For all K&N Chevy, GMC, Cadillac SUV and truck air intakes visit the Chevy Air Intakes, GMC Air Intakes, Cadillac Air Intakes pages on KNFilters.com.