2011, 2012 and 2013 Dodge Challenger models are performance-based vehicles that give their owners driving excitement. Their 6.4L V8 motor is designed for raw power output in both horsepower and torque and it certainly delivers with break horsepower and torque ratings of 470 horses and 470 lb-ft. torque. However, simply because this vehicle has been designed to deliver horsepower is no reason that there isn't room for more of that driving excitement. K&N has focused on reducing restriction and increasing power to engines for well over 40 years and this experience has been applied to their 69-2545TP Typhoon air intake system design.
K&N Air Intake Installed on 2011 Dodge Challenger SRT-8 6.4L
Dyno Chart for 69-2545TP air intake system
K&N Air Intake System for several Dodge Charger and Challenger Models and Chrysler 300 Models
The 69-2545TP is simple in both concept and application. The optimized intake tube and high flow filter are intended to minimize restriction for the big 6.4L V8. The optimization speaks for itself as evidenced by the estimated additional 22 horsepower and 19.25 lb-ft of torque at the wheels when tested. Considering that of the 470 break horsepower only 394 horsepower make it to the wheels, this is an exceptional increase.
In addition to fiting several Dodge Challenger models, the 69-2545TP
also fits 2012 to 2016 Dodge Charger and 2012 to 2015 Chrysler 300 models with 6.4 liter engines.
The extra horsepower is a welcome addition for those interested in unleashing all of the performance that their engines are yearning to put down. The 69-2545TP intake system is a simple bolt-on-and-go intake system. Installation can be completed with basic hand tools in about 90 minutes. The RF-1042 air filter on this intake kit is washable and reusable. It can be used for up to 100,000 miles before cleaning is needed depending on driving conditions so you won't need to worry about that for a while. K&N confidently backs this air intake system with the famous K&N Million Mile Limited Warranty so you can have peace of mind that this kit is the pinnacle of air intake engineering.
The 69-2545TP intake system fits the following applications:
2016 DODGE CHARGER 6.4L V8
2016 DODGE CHALLENGER 6.4L V8
2015 DODGE CHARGER 6.4L V8
2015 DODGE CHALLENGER 6.4L V8
2015 CHRYSLER 300 6.4L V8
2014 DODGE CHARGER 6.4L V8
2014 DODGE CHALLENGER 6.4L V8
2014 CHRYSLER 300 6.4L V8
2013 DODGE CHARGER 6.4L V8
2013 DODGE CHALLENGER 6.4L V8
2013 CHRYSLER 300 6.4L V8
2012 DODGE CHARGER 6.4L V8
2012 DODGE CHALLENGER 6.4L V8
2012 CHRYSLER 300 6.4L V8
2011 DODGE CHALLENGER 6.4L V8
Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.