K&N Infiniti G35 on Display at SEMA 2009 in Las Vegas, Nevada

 
 
K&N Infiniti G35 at SEMA Show 2009
K&N Infiniti G35 at SEMA Show 2009

K&N oil filter, part number HP-1018 is part of the engine specifications on the K&N Infiniti G35
K&N oil filter, part number HP-1018 is part of the engine specifications on the K&N Infiniti G35

The K&N Infiniti G35 is scheduled to attend selected media events in 2010
The K&N Infiniti G35 is scheduled to attend selected media events in 2010
K&N employees put the final touches on the K&N Infiniti G35 before it gets wrapped for SEMA 2009
K&N employees put the final touches on the K&N Infiniti G35 before it gets wrapped for SEMA 2009

K&N employees worked in the K&N race shop for many hours to get the K&N Infiniti G35 ready for SEMA 2009
K&N employees worked in the K&N race shop for many hours to get the K&N Infiniti G35 ready for SEMA 2009

K&N Infiniti G35 tested on one of K&N's Dynos
K&N Infiniti G35 tested on one of K&N's Dynos
K&N will have several unique vehicles on display at the 2009 SEMA (Specialty Equipment Market Association) Show in Las Vegas, Nevada. SEMA is one of the largest automotive aftermarket conventions in the world. It will take place from November 3 to November 8 at the Las Vegas Convention Center.

One of the showcase vehicles in K&N’s booth, Central Hall number 22443, will be a 2003 Infinti G35. The car was built by K&N employees at K&N headquarters in Riverside, California.

Many of the components found in the car are one of a kind. Julian Hinojos and Jonathan Fiello designed the custom plenum intake manifold using CFD software. There is also a custom dual inlet K&N air filter.

The K&N Infiniti G35 specification sheet includes:

Engine:
3.5 liter V6 Twin Turbo
Turbocharger Jim Wolf with Custom K&N plumbing
Built Bottom end by Cosworth Assembled by K&N
BRE Cylinder Heads
NISMO Cams
Super Tech Valves and springs
K&N Custom Dual Inlet Air Filter
K&N Oil Filter part number HP-1018

Transmission:
Borg Warner T56 6 SPD
4.09 Rear End Gears
Inland Empire Driveline Aluminum Driveshaftv Driveshaft shop axles/Quaife LSD
Speedway Engineering Sway bar with SPL end links
Custom Roll cage by K&N sub frame re-enforcement and seam welding
Stillen Upper control arms
K&N Fabricated Mid Links and Toe arms
Stop Tech 4 Piston front and rear brakes
Hawk DTC 170 Brake Pads

Exterior:
Viral Sport by Anceltion Carbon Fiber doors, hood fenders and trunk lid
SEIBON
Volk Wheels
Hankook Tires

Interior:
Sparco Pro 2000 seats
Woodward collapsible steering column
Sparco steering wheel
Sparco safety harness
Safecraft SFI Fire System

After the SEMA show, the K&N Infiniti G35 is scheduled to attend selected media events in 2010. It will also be at the Optima Batteries Ultimate Street Car Invitational in Pahrump, Nevada running in the exhibition class.

Find K&N products for your vehicle using the K&N application search then use the K&N dealer search to find a K&N dealer in your part of the world.



See What K&N Makes for Your Car! Get the K&N Newsletter! Visit K&N on HyperLink Facebook  or  HyperLink Twitter

Printer Image    Email This Story
 
Did you like this story? Select 1 to 5 stars to rate it.
 
K&N Engineering, Inc., with headquarters in Riverside, California, has been the world's leader in performance filter technology since 1969, serving the needs of the automotive, motorcycle, marine, industrial and military markets. K&N is heavily involved in nearly every form of motorsports from off-road and powersports to drag racing, stock cars and road racing. For more information about K&N Filters, please contact K&N Engineering, Inc., P.O. Box 1329, Riverside, CA 92502-1329, (800) 213-4182 for a dealer near you, (800) 858-3333 for technical service/questions, (951) 826-4001 Fax, e-mail tech@knfilters.com, or visit www.knfilters.com.

K&N News Home