K&N Marine Personal Watercraft Flame Arrestor Performance Parts and Accessories

Recharger® Filter Care Service Kits
will clean your dirty cotton media flame arrestor
so it performs like new!

 

Carburetor Adapters 

 

85-9231
FLANGE SIZE: 2-3/4”OD
VENTURI DIAMETER: 1.845”ID
# OF MOUNTING BOLTS: 2
BOLT CIRCLE DIAMETER: 2.65”
MOUNTING HARDWARE 
INCLUDED: (2) 6mm-1.00x105mm stainless steel Allen bolts

2-Piece design assures that mounting bolts can not come loose.

85-9329
FLANGE SIZE: 2-3/4"OD
VENTURI DIAMETER: 1.625" ID
# OF MOUNTING BOLTS: 3
BOLT CIRCLE DIAMETER: 2.165"
MOUNTING HARDWARE 
INCLUDED: (3) 6mm-1.00 x 20mm stainless steel flat head Allen bolts

2-Piece design assures that mounting bolts can not come loose.

 

85-9265
FLANGE SIZE: 2-3/4"OD
VENTURI DIAMETER: 1.645" ID
# OF MOUNTING BOLTS: 2
BOLT CIRCLE DIAMETER: 2.65"
MOUNTING HARDWARE 
INCLUDED: (2) 6mm-1.00 x 105mm stainless steel Allen bolts

85-9388
FLANGE SIZE: 2-3/4"OD
VENTURI DIAMETER: 1.625" ID
# OF MOUNTING BOLTS: 3
BOLT CIRCLE DIAMETER: 2.165"
MOUNTING HARDWARE 
INCLUDED: (3) 6mm-1.00 x 20mm stainless steel flat head Allen bolts

2-Piece design assures that mounting bolts can not come loose.

 

85-9287
FLANGE SIZE: 2-3/4"OD
VENTURI DIAMETER: 1.645" ID
# OF MOUNTING BOLTS: 2
BOLT CIRCLE DIAMETER: 2.65"
MOUNTING HARDWARE 
INCLUDED: (2) 6mm-1.00 x 105mm stainless steel Allen bolts

85-9394
FLANGE SIZE: 2-3/4"OD
VENTURI DIAMETER: 1.625" ID
# OF MOUNTING BOLTS: 3
BOLT CIRCLE DIAMETER: 2.165"
MOUNTING HARDWARE 
INCLUDED: (3) 6mm-1.00 x 20mm stainless steel flat head Allen bolts

2-Piece design assures that mounting bolts can not come loose.

 

85-9291
FLANGE SIZE: 2-3/4"OD
VENTURI DIAMETER: 1.965" ID
# OF MOUNTING BOLTS: 2
BOLT CIRCLE DIAMETER: 2.65"
MOUNTING HARDWARE 
INCLUDED: (2) 6mm-1.00 x 105mm stainless steel Allen bolts
85-9293
INCLUDES: (2) 120mm bolts

85-9445
FLANGE SIZE: 2-3/4"OD
VENTURI DIAMETER: 1.845" ID
# OF MOUNTING BOLTS: 4
BOLT CIRCLE DIAMETER: 2.50"
MOUNTING HARDWARE 
INCLUDED: (4) 6mm-1.00 x 20mm stainless steel flat head Allen bolts

2-Piece design assures that mounting bolts can not come loose.

 

85-9294
FLANGE SIZE: 2-3/4"OD 
VENTURI DIAMETER: 1.960" ID
# OF MOUNTING BOLTS: 2
BOLT CIRCLE DIAMETER: 2.568"
MOUNTING HARDWARE 
INCLUDED: (2) 6mm-1.00 x 20mm stainless steel flat head Allen bolts
(See Carburetor Bracket below)

2-Piece design assures that mounting bolts can not come loose.

85-9446
FLANGE SIZE: 2-3/4"OD
VENTURI DIAMETER: 1.960" ID
# OF MOUNTING BOLTS: 4
BOLT CIRCLE DIAMETER: 2.50"
MOUNTING HARDWARE 
INCLUDED: (4) 6mm-1.00 x 20mm stainless steel flat head Allen bolts

2-Piece design assures that mounting bolts can not come loose.

 

85-9000 or 85-9001
Carb. Bracket
Use with adapter P/N 85-9294 on 1994-96 Sea Doo GTX, HX, SPX and XP to prevent intake manifold from cracking. Use one bracket per vessel.

85-9491
FLANGE SIZE: 2"OD
VENTURI DIAMETER: 1.845" ID
# OF MOUNTING BOLTS: 4
BOLT CIRCLE DIAMETER: 2.50"
MOUNTING HARDWARE 
INCLUDED: (4) 6mm-1.00 x 20mm stainless steel flat head Allen bolts
(2) 90? 1/8" vents

2-Piece design assures that mounting bolts can not come loose.

 

85-9496
FLANGE SIZE: 2-3/4" OD
VENTURI DIAMETER: 1.845" ID
# OF MOUNTING BOLTS: 4
BOLT CIRCLE DIAMETER: 2.50"
MOUNTING HARDWARE 
INCLUDED: (4) 6mm - 1.0 x 20mm
stainless steel flat head Allen bolts,
(2) vents 90? 1/8" hose

2-Piece design assures that mounting bolts can not come loose.

 

K&N Wetsuits

K&N Wetsuits are silicone treated foam filter wraps designed to repel water that may splash up on the K&N Flame arrestor. The wetsuits come pre-treated and will remain treated until cleaned with K&N Filter Cleaner. After cleaning, re-treat the wetsuit with silicone spray (available locally). The wetsuit will not seal the flame arrestor from complete submerging, however, if you keep your flame arrestor properly oiled, the cotton gauze will not be able to soak up any water.

 

Color   Fits K&N Flame Arrestor               Size In Inches             Part #  
Blue    59-2000                               4-1/2x7x2                  25-5911
Purple  59-2030                               Tapered 6" Tall            25-5943

 

Drychargers

The Drycharger is a silicone treated, polyester wrap that is made to cover your K&N Personal Watercraft Flame Arrestor. These Drychargers, which are similar to the K&N Prechargers, contain uniform micron sized openings that allow optimum air flow. Yet, due to the Drychargers silicone treated polyester wrap, the amount of water that reaches the flame arrestor is limited. The Drycharger uses a sewn in elastic opening to securely fasten it to the flame arrestor. Now you won't be hung out to dry after submerging your PWC.

 


Color   Fits K&N Flame Arrestor   Size In Inches            Part #    

Blue    59-2000                   4-1/2 x 7 x 2              22-2000PL
Blue    59-2015                   4-1/2 x 7 x 3 tapered      22-2015PL
Blue    59-2020                   4-1/2 x 7 x 3              22-2020PL
Blue    59-2030                   round conical 6" tall      22-2030PL
Blue    59-2040                   round conical 4" tall      22-2040PL
Blue    59-2840                   5-1/2 x 9 x 2-1/2 oval     22-2840PL
Red     59-2000                   4-1/2 x 7 x 2              22-2000PR
Red     59-2015                   4-1/2 x 7 x 3 tapered      22-2015PR
Red     59-2020                   4-1/2 x 7 x 3              22-2020PR
Red     59-2030                   round conical 6" tall      22-2030PR
Red     59-2040                   round conical 4" tall      22-2040PR
Red     59-2042R                  round conical 2-1/2" tall  22-2042PR
Red     59-2042RK                 round conical 2-1/2" tall  22-2042PR
Red     59-2840                   5-1/2 x 9 x 2-1/2 oval     22-2840PR

 

Power, Performance, Protection - The K&N Flame Arrestor!