SEARCH BY VEHICLE

K&N Marine Flame Arrestors & Accessories Boat Applications

K&N Marine Flame Arrestor 59-1195

K&N Flame Arrestors for Boats

  • Marine approved per SAE J1928 standard
  • Designed to increase horsepower & torque
  • Washable and reusable air filter

Due to the differences in engine compartment designs, and accessories supplied by those manufactures, clearances may vary from boat to boat. The applications listed are to be used as a reference guide only. Make sure to double check all the measurements before ordering by using the checklist below. If you wish to increase or decrease the size of the filter, see Universal 3-Piece assemblies below. (K&N Marine Flame Arrestor 59-1195 shown in picture)


K&N Marine Flame Arrestors for Indmar Boats

Engine & Fuel SystemEngine SizeTotal HeightElement HeightK&N Flame ArrestorFootnotes
5.7L Malibu Vortec 4 bbl5.7L V83.75"2"59-32641
5.7l Vortec Carb 4 bbl5.7L V83.75"2"59-32641
5.7L Vortec TBI5.7L V83.75"2"59-32641,3
7.4L 4 bbl7.4L V83.75"2"59-32641
7.4L MPI7.4L V8N/AN/A59-5020
8.1L 4 bbl8.1L V84.50"2.75"59-33641,2
8.1L PFI8.1L V8N/AN/A59-5020

K&N Marine Flame Arrestors for Mercury Boats

Engine & Fuel SystemEngine SizeTotal HeightElement HeightK&N Flame ArrestorFootnotes
3.0L 2 bbl*3.0L L43.75"2"59-32641
4.3L 2 bbl*4.3L V63.75"2"59-32641
4.3LH 4 bbl4.3L V63.75"2"59-32641
4.3L EFI TBI4.3L V63.75"2"59-32641,3
5.0L 2 bbl*5.0L V84.50"2.75"59-33641,2
5.0L EFI TBI5.0L V84.50"2.75"59-33641,2,4
5.7L 2 bbl*5.7L V84.50"2.75"59-33641,2
5.7L SKI 2 bbl*5.7L V84.50"2.75"59-33641,2
5.7L EFI TBI5.7L V84.50"2.75"59-33641,2,4
98-00 Mercruiser7.4L V86.625"6"59-5004
Early Mercruiser MPI 3V Pulley454 MAG4.375"4"59-45415
Early Mercruiser MPI 3V Pulley502 MAG4.375"4"59-45415
Late MPI Serpentine Belt454 MAG4.375"4"59-45426
Late MPI Serpentine Belt502 MAG4.375"4"59-45426
496 MPI8.1L V84.375"4"59-5005
496 HO & Mag MPI8.1L V84.375"4"59-5005
HP 500 4 bbl8.2L V86.75"5"59-33701,2
HP 500 MPI8.2L V84.375"4"59-5020

K&N Marine Flame Arrestors for Volvo Penta SX Series Boats

Engine & Fuel SystemEngine SizeTotal HeightElement HeightK&N Flame ArrestorFootnotes
3.0 GS 2 bbl*3.0L L43.75"2"59-32641
4.3GL 2 bbl*4.3L V63.75"2"59-32641
4.3L Gi EFI-TBI4.3L V63.75"2"59-32641,3
5.0GL 2 bbl*5.0L V84.50"2.75"59-33641,2
5.0L Gi EFI-TBI5.0L V84.50"2.75"59-33641,2,4
5.7 GS 2 bbl*5.7L V84.50"2.75"59-33641,2
5.7L Gsi EFI-TBI5.7L V84.50"2.75"59-33641,2,4
7.4 Gi MPI7.4L V84.50"2.75"59-33641,2,4

K&N Marine Flame Arrestors for Volvo Penta Duoprop Series Boats

Engine & Fuel SystemEngine SizeTotal HeightElement HeightK&N Flame ArrestorFootnotes
4.3GL 2 bbl*4.3L V63.75"2"59-32641
4.3L Gi EFI-TBI4.3L V63.75"2"59-32641,4
5.0GL 2 bbl*5.0L V84.50"2.75"59-33641,2
5.0L Gi EFI-TBI5.0L V84.50"2.75"59-33641,2,4
5.7 GS 2 bbl5.7L V84.50"2.75"59-33641,2
5.7L Gsi EFI-TBI5.7L V84.50"2.75"59-33641,2,4
7.4 Gi EFI-MPI7.4L V84.50"2.75"59-33641,2,4
7.4 Gsi EFI-MPI7.4L V84.50"2.75"59-33641,2,4
8.1L MPI EFI-MPI8.1L V84.50"2.75"59-33641,2,4

K&N Marine Flame Arrestors for Volvo Penta High-End Series Boats

Engine & Fuel SystemEngine SizeTotal HeightElement HeightK&N Flame ArrestorFootnotes
DPX 385 EFI-MPI7.4L/4544.50"2.75"59-33641,2,4
DPX 415 EFI-MPI8.2L/5024.50"2.75"59-33641,2,4
DPX 500 EFI-MPI8.2L/5024.50"2.75"59-33641,2,4
DPX 600 EFI-MPI8.8L/5404.50"2.75"59-33641,2,4

K&N Marine Flame Arrestor for Volvo Penta Inboard Series Boats

Engine & Fuel SystemEngine SizeTotal HeightElement HeightK&N Flame ArrestorFootnotes
7.4Gi EFI-MPI7.4L/4544.50"2.75"59-33641,2,4

K&N Marine Flame Arrestor for Volvo Penta Platinum Series Boats

Engine & Fuel SystemEngine SizeTotal HeightElement HeightK&N Flame ArrestorFootnotes
7.4Gi EFI-MPI7.4L/4544.50"2.75"59-33641,2,4

IMPORTANT: DID YOU CHECK THE FOLLOWING?

  1. Diameter clearance around the existing flame arrestor. Can the flame arrestor diameter be increased?
  2. Height restriction, due to hatch clearance or any other obstruction. Can the flame arrestor’s height be increased?
  3. Do any vent lines connected to existing flame arrestor. If there are vent lines attached, measure inside diameter of vent line and order appropriate vent hose kit below.
  4. For multiple carburetor application, check center to center measurements ensuring enough space for two flame arrestors.
  5. Check diameter of carburetor.

Footnotes for above applications: 1) May increase size as needed. 2) May decrease size as needed. 3) Use Z-stud Part #08008. 4) Use Z-stud Part #08009. 5) Kit includes adapter Part# 85-8837 and flame arrestor Part# 59-5005. 6) Kit includes adapter Part# 85-8837 and flame arrestor Part# 59-5006. 7) Single Stud, 3-7/8" throttle body 8) 3 Studs, 3-5/8" throttle body.

* Fits Holley 2 bbl. For Rochester 2 bbl. (3 1/16” Neck Flange) use Part# 59-3262 or 59-3362.


Universal 3-Piece Air Filter Assembly

Outside DiameterFlange DiameterElement HeightTotal HeightVelocity StackK&N Flame Arrestor
14"5-1/8"2.25"3.87"No59-3214
14"5-1/8"3.0"4.62"No59-3314
14"5-1/8"4.0"5.62"No59-3414
9"5-1/8"2.75"4.5"No59-3364
9"5-1/8”2.0"3.75"No59-3264
9"5-1/8"5.0"6.75"No59-3370
9"5-1/8"2.75"8.5"Yes59-1195
9"5-1/8"5.0"10.75"Yes59-1196
9"4-7/32"2.75"4.5"No59-3368
9"3-1/16"2.0"3.75"No59-3262
9"3-1/16"2.75"4.5"No59-3362
9"2-5/8"2.75"4.5"No59-3360
9"7-5/16”5.0"10.75"Yes59-1198
9"7-5/16"2.75"4.5"No59-0284
9"7-5/16"2.75"8.5"Yes59-3366
9"7-5/16”5.0"6.75"No59-1197

 

K&N Flame Arrestor 59-5004 for 98-00 Mercruiser 7.4L
K&N Flame Arrestor 59-5004 for 98-00 Mercruiser 7.4L

K&N Flame Arrestor 59-3364 for Carb Applications
K&N Flame Arrestor 59-3364 for Carb Applications

K&N Flame Arrestor 59-5005 for Mercruiser 496 HO
K&N Flame Arrestor 59-5005 for Mercruiser 496 HO

K&N Flame Arrestor 59-5020 for Mercruiser HP 500
K&N Flame Arrestor 59-5020 for Mercruiser HP 500

K&N Flame Arrestor Vent Hose Adapter for 3 Piece Assembly
K&N Flame Arrestor Vent Hose Adapter for 3 Piece Assembly

K&N Flame Arrestor 59-4541 for Mercruiser 454/502 Magnum
K&N Flame Arrestor 59-4541 for Mercruiser 454/502 Magnum


Marine Vent Hose Adapters (Trimming for correct height may be required)

Vent Hose SizeAir Filter HeightVent Adapter
1/4"2.75"85-1325
1/4"4"85-1425
1/4"6"85-1625
3/8"2.75"85-1337
3/8"4"85-1437
3/8"6"85-1637
1/2"2.75"85-1350
1/2"4"85-1450
1/2"6"85-1650
5/8"2.75"85-1362
5/8"4"85-1462
5/8"6"85-1662
3/4"2.75"85-1375
3/4"4"85-1475
3/4"6"85-1675

K&N Clamp-On Marine Flame Arrestors

K&N Clamp-On Marine Flame Arrestors

TypeFlangeLengthWidthHeightNotesK&N Flame Arrestor
Oval2.93"x4.75"6.5"4.75"5.62"GM TPI59-5000
Oval2.93"x4.75"8.62"4.5"3.18"GM LT-1 No Vent59-5020
Oval2.93"x4.75"8.62"4.5"3.18"GM LT 5/8" Vents(2)59-5021
Oval2.93"x4.75"8.62"4.5"3.18"GM LT-1 5/8" Vent59-5019
Oval2.93"x4.75"8.62"5.25"5.5"GM 454 TPI59-5050
Oval3.44"x5.44"8.5"5.06"5"59-5007
Round3.75"9.5"x4.625"B8.5"x3.75"T4"454/502 MAG59-5005
Round3.75"9.5"x4.625"B8.5"x3.75"T4"454/502 MAG 1/2" Vent59-5006
Round3.5"5"4.5"x3.25"5"59-5003
Round3.625"5.75"3"6"59-5004
Round3.625"5.75"3"6"96-97 GM 2) 3/4" Vents59-5001
Round3.75"9.31"4.5"3"96-97 GM (2) 5/8" Vents59-5022
Round3.75"9.31"4.5"3"96-97 GM (2) 3/4" Vents59-5023
Round3.75"9.31"4.5"3"96-97 GM59-5030
Round3.75"9.314.5"3"96-97 GM 5/8" Vent59-5010
Round3.75"5.25"3"6"59-2030
Round4"5.38"4.5x3.25"5"59-5002