|
High Performance ... Straight Out of the Box!
K&N Universal air filters are designed
and manufactured for a wide variety of applications. Regardless
of the angle, offset diameter of the air intake, there is a K&N
Universal air filter for your Kart. All filters are constructed
with ultra-strong molded pliable rubber flanges which absorb
vibration and allow for secure attachment and can also be stretched
for up to 1/16" (1.5mm) to fit in-between sizes. K&N
Universal air filters are available in round, tapered and oval
designs, for just about any special application.
See our XStream®
Filter page for all available sizes of XStream®
filters like those shown above.
Note: In addition to the universal air filters shown below, we
manufacture hundreds of other universal air filters that may meet
your KART needs.
See our Universal Filters page for a
full listing of our universal air filters.
|
2-7/16"
Flange Mount |
Mounting Flange Dia./Length
Part # PreCharger Part #
2-7/16" Centered, Round 3-1/2"Dx4"
RU-0800 RU-0500PK
2-7/16" Centered, Round 3-1/2"Dx6"
RU-0820 RU-0520PK
2-7/16" 20° Angle, Round 3-3/4"Dx4"
RU-1750 22-8011PK
2-7/16" 20° Angle, Round 3-3/4"Dx6"
RU-1770 RU-1470PK
2-7/16" Centered, Round 4-1/2"Dx4"
RU-0830 22-8013PK
2-7/16" Centered, Tapered 4-1/2"Dx5"
RU-0840 22-8013PK
2-7/16" Offset, Tapered 5-1/2-4-1/2"D(top)x4"
R-1380 22-8031PK
2-7/16" 20° Angle, Oval 4-1/2"-3-3/4"Dx7"
RU-1390 RU-1240PK
|
|
1-11/16" Flange Mount |
Mounting Flange Dia./Length
Part # PreCharger Part #
1-11/16" Centered, Round 3"Dx4"
RU-0200
22-8009PK
1-11/16" Centered, Round 4"Dx2"
RU-0260 - -
- -
|
|
2-3/4"
Flange Mount |
Mounting Flange Dia./Length
Part # PreCharger Part #
2-3/4" 10° Angle, Round 4"Dx5"
RU-1460
RU-1460PK
2-3/4" Centered, Round 4-1/2"Dx4"
RU-0900
22-8012PK
2-3/4" Centered, Oval 6-1/4"-4"Dx5"
RU-1500
- - - - - |
|
Replacement Air Filters for Honda GX-160 |
Kart Engine
K&N Part # HA-0201 replaces
Original Equipment Part #17210-ZEI-822 |
|
Other
KART Products |
K&N KART Airbox and Air Filters
Many of the
organizations that sanction Go Kart racing now require air boxes due to noise
restrictions. The K&N air box, part
RK-1000, for Karts accepts one
of two K&N washable/reusable High-Flow Air Filters, the
RU-5005 and
RU-5006. The RU-5005 has
a straight flange and the RU-5006 has a 20 degree flange.
29 mm I.D. Restrictors 85-2000
23 mm I.D. Restrictors 85-2001
In most cases, K&N
Kart Airboxes can be mounted onto the carburetor.
 
Feel the Power In The Air!
K&N's new "Kart" air filter, when matched to the new
K&N adapter, allows you to use the standard "spec"
plenum air box silencer with either "one, two or three"
velocity tubes. Easy to mount. Comes with all instructions and hardware.
The K&N air filter element comes with a stainless steel or rubber
top plate. Also standard is enough airflow to power a small block
V-8 racing engine plus K&N's renowned dirt stopping ability.
The stainless steel top filter part number is
RC-5004 (RU-5004 Rubber Top) and the adapter part number is 85-8851.
KART
XStream®
PreChargers
The K&N XStream® PreCharger is a specially designed filter wrap
made to extend the service interval of your K&N XStream® Filtercharger
when used in very dirty, muddy or dusty conditions. They are made
from a highly durable polyester material containing uniform micron
openings. The XStream® PreCharger
will stop small dirt particles with minimal restriction to the airflow
of the filter. The XStream® PreCharger
is designed to be run dry
and can be cleaned with K&N Filter Cleaner. The XStream®
PreCharger is custom made to fit each application. Elastic binders ensure that
the XStream® PreCharger will stay in place.
See our Filter Wrap page for more
applications.
These filters are legal ONLY for racing
vehicles. Not applicable, nor intended for use on emission controlled
street or highway vehicles.
Copyright © 2008 K&N Engineering, Inc. All Rights Reserved.
|
