Billet Aluminum Spoked Lids
| A recent
addition to our Custom 66 Series™, these 14” assemblies feature a
billet aluminum spoked lid with a carbon fiber insert. Both fit 5
1/8” carburetor flanges. Full assemblies shown on
Custom 66 page. |
 |
 |
|
10 Spoke
Design P/N 85-6850 |
5 Spoke
Design P/N 85-6848 |
XStream® Chevy & GMC
Replacement Lid
|
|
Improve airflow and appearance
on your late model
Chevrolet-GMC truck and 1968 to 1995 GM vehicles with one of our new
XStream® air cleaner lids. Each lid comes in deep luster
chrome with our XStream® Air Flow Top built in! These direct
replacement lids are an inexpensive way to dress up your engine
compartment and increase your airflow.
Air Filter Top: 66-1201
|
Carbon Fiber Lid
|
|
K&N has taken advantage
of the lightness, strength and durability of carbon fiber to bring you
our Carbon Fiber Lid. This new lid combines all the necessary features
for racing with the good looks only carbon fiber can provide. Easy to
install. This top lid fits K&N air filters part numbers E-3740,
E-1650, E-3743, E-3745, E-3730, E-3750,
E-3732, E-3760, E-3770 or any round air filter
with an 14" outside diameter. At 4.6 oz this lid weighs 1/4 as
much as our standard chrome top plate.
14" O.D. top plate
Carbon fiber (center rises 1")……… 85-6840
|
14" Drop Base Plate
|
|
K&N's 14" air
filter drop base plate is available separately for replacement or
special applications. Base plate fits carburetors with 5-1/8"
airhorn flange. This drop base will clear electric choke mechanisms.
14" O.D. drop base,
Chrome plated steel, 5-1/8" flange (drops filter 7/8" below
carb flange) ………………………………………85-3545
|
|
Neck Flange
|
K&N P/N Element
|
K&N P/N Complete Assembly
|
|
5-1/8"
|
|
|
|
5-1/8"
|
|
|
|
5-1/8"
|
|
|
|
5-1/8"
|
|
|
14" Offset Flat Base Plate
|
|
K&N's 14" air
filter offset flat base plate is available separately for replacement
or special applications. Base plate is offset 1-1/2" and fits
carburetors with 5-1/8" airhorn flange.
|
|
Neck
Flange
|
K&N P/N Element
|
K&N P/N Complete Assembly
|
|
5-1/8"
|
|
|
|
5-1/8"
|
|
|
|
5-1/8"
|
|
|
14" O.D. offset flat base,
Chrome plated steel, 5-1/8" flange
(sets filter 1-1/2" off carb flange) 85-3540
Custom Air Filter Plates
|
|
K&N's 14" air
filter plates are available separately for replacement or special
applications. Base plates fit carburetors with 5-1/8" or
7-5/16" airhorn flange. Drop base will not clear all electric
choke mechanisms, it may be necessary to space up base plate with a
locally available air cleaner spacer.
|
|
|
|
|
|
Description
|
K&N P/N
|
|
14" O.D. drop base
Chrome plated steel, 5-1/8" flange
(drops filter 1-1/4" below carb flange)
|
|
|
14" O.D. flat base
Chrome plated steel, 5-1/8" flange
(raises filter 9/16" above carb flange)
|
|
|
14" O.D. flat base
Nylon reinforced plastic, 7-5/16" flange
(raises filter 3/4" above carb flange)
|
|
|
14" O.D. top plate
Chrome plated steel,
(center rises 1", stamped with K&N logo)
|
|
Chevy/GMC Chrome
Tops
|
|
Improve the overall appearance
of the engine compartment on your late model Chevrolet-GMC truck and
1968 to 1992 GM vehicles with one of our new chrome air cleaner lids.
Each lid comes in a deep luster chrome embossed with the K&N logo. These
direct replacement lids are an inexpensive way to dress up your engine
compartment without disturbing emission control equipment. Available
separately or packaged with an E-1500 filter element to make a complete
kit.
|
|
|
|
|
|
Description
|
K&N P/N
|
|
88-92 Chevy/GMC
Pickup (w/single wing nut) V8 Complete Kit With
Chrome Top Lid and Replacement Filter (E-1500)
|
|
68-92 GM vehicles using
12" o.d. x 3-1/2" h. filter (E-1500)
Complete Kit W/Chrome Top Lid and Replacement Filter
|
|
|
|
|
93-95 Chevy/GMC Pickup (w/dual
wing nuts) V8 Complete Kit With
Chrome Top Lid and Replacement Filter (E-1500)
|
|
|
|
|
These filters are legal ONLY for racing
vehicles. Not applicable, nor intended for use on emission controlled
street or highway vehicles.
Copyright © 2008 K&N Engineering, Inc. All Rights Reserved.
|
